Part Location Diagram of BC0342 Senco Seal
See part 11 in the diagram
( Grid squares measure 1x1 inch )

Seal BC0342

Manufactured by:
Senco
ERP Number:
ERP10071583
Part Number:
BC0342
Original Equipment Manufacturer ?
  Works with your model  FRAMEPRO650FRH!
$13.00
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   FRAMEPRO650FRH!

Product Description

?

It is a high quality replacement part that is specially designed for use with Senco nailers. This is one of the seals for the cylinder, please make sure to check appropriate diagrams for correct location and use of this item. One durable rubber seal is included per order.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Senco
This part works with the following products:
  • Nailer

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

leaking air from top, not firing.

Stephen from Hollywood, South Carolina

1 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Using a 5mm hex wrench, remove the four screws from top of the nail gun. Be a little careful, as there is a spring in the assembly that will push the top of the gun off. I used a schematic I printed from the Senco website to identify the broken parts and determine the correct reassembly order. Otherwise, just remove one o-ring or seal at a time and replace with the one from the kit. It seems that this kit is designed for multiple tool models so you will have a few parts left over. The challenge in the reassembly was figuring out that large outer seal on the aluminum chamber had to be installed in the gun body and the tube the installed.

Did you find this story helpful?
Thank you for voting!
  • 1