Part Location Diagram of 897554 DeWALT NOSE CUSHION
See part 424 in the diagram
( Grid squares measure 1x1 inch )

NOSE CUSHION 897554

Manufactured by:
DeWALT
ERP Number:
ERP18987857
Part Number:
897554
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(23 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine Porter Cable replacement part designed for use with Staplers. This part is made out of Plastic and it is Sold Individually. The Nose Cap is attached to end of the Pushing Lever to prevent the material that it is being used on from getting marred or dented by the pushing lever. It is a advisable to have one or two extra Nose Caps on hand as they do have a tendency to crack and deteriorate over time or simply get lost. This Cushion fits over the End of Safety Shaft. When securing this part, the open face of the cushion is positioned towards the front of the stapler.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Porter Cable
This part works with the following products:
  • Nailer
Part# 897554 replaces these:
897554,

Customer Part Reviews

?
4.1
Average Rating (out of 5):
★★★★★
★★★★★
(18 Reviews)
Click to filter by ratings:
  • 5 stars
    12
  • 4 stars
    2
  • 3 stars
    0
  • 2 stars
    2
  • 1 star
    2
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(23 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Nose cusion wore out

James from Granbury, Texas

5 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
904725, 897554, 894742
Just pushed the new nose cushion on.
Did you find this story helpful?
Thank you for voting!

Would not fire

Tom from SOMERVILLE, Alabama

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
A00972, 897554, 884443, 903775
Replaced the parts with those in the rebuild kit, also while cylinder was out replaced it. Followed the instructions in the overhaul kit.
Did you find this story helpful?
Thank you for voting!

Nose cushion fell off.

Harry from MOULTONBOROUGH, New Hampshire

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
897554
Repair was easy and fast. Plenty of instruction s with the tool. Thanks for quick delivery!
Did you find this story helpful?
Thank you for voting!

nose cushion came off and replacing it was easy

Howard from STAFFORD, Virginia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
897554
just popped it on
Did you find this story helpful?
Thank you for voting!

Nose cushion had broken

charles from NEWBURGH, Indiana

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
897554
Installed replacement part, easy.
Did you find this story helpful?
Thank you for voting!

Nose cushion worn out, the retainer came off of the trigger pin

Randolph from Rocky Face, Georgia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
897554, 890725
Put on the new retainer and pulled off the old nose cushion and put a new one on.
Did you find this story helpful?
Thank you for voting!

Nose cushion wore out

Ken from The Villages, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
897554
Was simple to install the correct part that was received from ereplacementparts.com
Did you find this story helpful?
Thank you for voting!

Pneumatic stapler nose cushion missing stapler would not fire

Thomas from Toms River, New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
897554
Pushed new nose cushion on with thumb and fore finger. Connected stapler to air hose from compressor tested on piece of scrap wood and bingo!GǪstapler fired and good as new!Thankyou to all at ereplacement parts!!!
Did you find this story helpful?
Thank you for voting!

Nail gun nose bumper broke

James from Galesburg, MI

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
897554
Popped the new one in place.
Did you find this story helpful?
Thank you for voting!

Nose cushions were broken on nailer and stapler. Took me more time to open up the bags then to put the nose cushions on and oil. Around 5 minutes total on both

Greg from Bermingham , Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
904725, 897554, 884293
1. opened the bags
2. oiled nailer and stapler
3. put nose cushions on
4. very very easy to do
5. no tools needed at all
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP18987857
Manufacturer Part Number: 897554
Brand Model Number Description
Porter Cable NS100A Nailer - Narrow Crown Stapler
Porter Cable NS150A Nailer - 1-1/2" Stapler