It is a genuine item that is specially designed for use with Black and Decker, Delta and Porter Cable nailers and staplers. Use about 5 or 6 drops of air tool oil daily before beginning to use your tool. This will ensure that the internal components are properly lubricated and will prevent them from wearing out. Make sure to refer to the owners manual of your model for the correct application of this air tool oil. This item is sold as a single 18CC container.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Right Stuff
Just what I needed.
Guest - May 27, 2019
Verified Purchase
★★★★★
★★★★★
Parts worked perfect
Parts worked fine
Guest - June 28, 2019
Verified Purchase
★★★★★
★★★★★
Nail gun repair
needed parts for my nail gun and your troubleshooting section showed me what parts i would need. Parts arrived ahead of schedule. Nail gun works like new.
Guest - June 21, 2020
Verified Purchase
★★★★★
★★★★★
Great
The recommended parts fixed the air leak and the parts were exact.
Guest - December 12, 2020
Verified Purchase
★★★★★
★★★★★
Just drop it inside
Came just fine without problems
Paul - April 6, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed the head assembly from the nail gun to where the air was flowing from and sepeated the parts. In doing this I found the collar was damaged and was broken into multiple pieces. I identified the pieces to order from a parts list online at eReplacement parts. Very simple and easy to use and gave recommendations based on previous repa
... Read moreirs.
1. Opened the nailer.
2. Removed old O-ring.
3. Installed new O-ring.
4. Lubricated all parts.
5. Closed up the the nailer.
6. Finished project.
Did you find this story helpful?
Thank you for voting!
Nose cushions were broken on nailer and stapler. Took me more time to open up the bags then to put the nose cushions on and oil. Around 5 minutes total on both
Took head apart and looked at parts then looked at booklet that came with the nail gun and figured out what was what and ordered them. looked at u tube video and completed repair
Did you find this story helpful?
Thank you for voting!
Was leaking air from the top of the nail gun all the time
Removed the top of 350 mag Porter Cable Air Nailer. Found the valve was crumbled up inside and a piece holding the valve open. Must have crumbled from old age or using the wrong oil. Replace the valve put it back together and worked fine.
Followed instructions provided, replacing old o-rings and seals with new parts. Used the lube supplied, where needed. Reassembled.
All is well, and it works like new, again.
Removed the 4 allen screws on the top of the nailer.
Removed the head unit
Removed the hammer assembly
Replaced both O-rings on hammer assembly inner and outer
Replaced outer o- ring on cylinder chamber
Reassembled unit
Did you find this story helpful?
Thank you for voting!
Would not drive brads completely. Brad nailer would bounce back when attempting to drive nail.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
