Genuine Manufacturer Sourced replacement part designed for use with some Porter Cable Nailers and Staplers. This part is made out of Plastic and it is Sold Individually. Over time due to constant pressure this part will wear out and will require replacement.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Super easy repair - works like a champ now!
I borrowed my neighbors porter and cable 15 gauge finishing nailer. Halfway through my project the gun just stopped working, the hammer wouldn't recoil. I took the thing apart and found this part smashed to bits. I ordered the new one and it came super super fast. Super easy to install. 5 minutes later I was back to using the nailer and the gun is working better now than before. Best of all when i returned it to my neighbor he wasnt mad that I broke his gun. Super pleased, love this site.
Guest - September 10, 2019
Verified Purchase
★★★★★
★★★★★
love it
Worked great I wish shipping was a little quicker
Randal - October 7, 2019
Verified Purchase
★★★★★
★★★★★
Right parts, quality service
I have ordered parts from ReplacementParts several times and have always received the correct quality OEM parts. I have also used their tech support in diagnosing problems. Turn-around on orders have always been quick. I am very pleased with their service.
Guest - December 12, 2019
Verified Purchase
★★★★★
★★★★★
Porter Cable finish nailer
Part received very quickly, exact replacement. Bought an extra for a spare. Thanks for the prompt service and a perfect replacement part. Gary in PA
Guest - December 23, 2019
Verified Purchase
★★★★★
★★★★★
Exact part, worked as expected
This sight is great for getting parts. They have great diagrams and descriptions to help with finding what you need.
Guest - April 23, 2021
Verified Purchase
★★★★★
★★★★★
Easy fix
My nail gun works again! Yeah
Guest - August 23, 2021
Verified Purchase
★★★★★
★★★★★
The part was great, fit perfectly.
The part fit well and was very easy to replace. The air gun works great. Thank you.
Guest - September 9, 2021
Verified Purchase
★★★★★
★★★★★
easy part look up,great website
correct part to repair my nail gun. quick ship,back on the job working. will continue to use for parts.
Guest - July 12, 2022
Verified Purchase
★★★★★
★★★★★
Perfect replacement!! Fixed my problem totally
Pistol grip for Porter Cable angle nailer.
Fit perfectly. My nailer was not returning fully, so it would not allow nails to advance into position. Once I took it apart I noticed small pieces of white plastic up in the head end of the housing. I realized this compoinent was busted into small pieces and would not allow the piston to return. The replacement was simple, very inexpensive and my nailer works great now.
Guest - January 21, 2023
Verified Purchase
★★★★★
★★★★★
defective parts replaced and back onto the job
PC finish nailer quit functioning. Disassembled the tool, discovered the defective parts, and ordered replacements here. Order arrived promptly, re-assembled the nailer with the new parts and it now works again.
Guest - March 1, 2023
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Disassemble the back and removed all the trash that was in the nailer (old piston grip was in a million pieces. Installed new part reassembled and it works like a new one
Remove top of gun with allen wrench. Remove valve piston. Replace piston stop and valve seal. I would also replace the head gasket. Replace head tighten allen screws.
I removed the top of the stapler with an allen wrench. The old piston grip had basically disintegrated in the cylinder. I shook out all the pieces and cleaned the inside with a clean rag. Following the diagram, I replaced the piston grip. After replacing the top and tightening the screws I tried the gun. The air leak was fixed.
1. Took Porter-Cable 15 ga nailer apart to diagnose problem
2. Using a P-C blowup of my nailer, I noticed the \"piston grip\" was the only part NOT intact
3. Ordered \"piston grip\" from ereplacementparts.com
4. Shook out pieces of old plastic piston grip and waited for new one
5. Reassembled P-C nailer and tested
... Read more 6. Worked very well!
Removed the top cap (part # 109) on the Porter Cable 250 A finish nailer.
Found the piston grip (part # 115) in MANY tiny pieces and washer (part #114) was badly bent.
Cleaned out all the broken pieces and relubricated. Ordered the new parts from ereplacentparts.com.
Installed the new replacement piston grip and washer.
... Read more (Helpful hint: use 2 longer bolts to help get the top cap back on, then replace with the 4 normal length bolts).
Repair time did not include the ordering and delivery time of the parts.
Pulled off back of Porter Cable finish nailer.
Took broken plastic part out of cap , cleaned well and oiled
Installed new piece , replaced back cover.
All fixed ,
1. Removed the back on the trim nail gun
2. Saw part had crumbled so used adjustable wrench to remove the spring assembly
3. Cleaned out crumbled part then installed new part inside of the spring and reassembled.
1- I removed the top of the nail gun (4 allen head bolts)
2- It was easy to see the damaged parts
3- I looked up the parts on eReplacementparts.com (super easy. Bookmark these guys)
4- Ordered the parts and while waiting, cleaned up the nail gun.
5- When parts arrived (on time and exactly what I needed) I installe
... Read mored the new parts and re-assembled the nail gun
6- Once everything was done, I hooked it up to my compressor and tested it.
7- DONE!
Repair was so easy, it would be a beginner level repair job. If I had thee parts on hand it would be under a half hour job.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
