This piston stop bumper is a genuine Bostitch replacement part that has been sourced to be used with pneumatic staplers and nailers. The bumper fits between the piston head valve and the end cap. This item is used to catch the spring and piston after the staple/nail is shot. This item is available as an individual replacement part.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Correct part for Bostitsch BT35B brad nailer
The Piston Stop Bumper T32007 for the Bostitch BT35B brad nailer arrived in good condition, was the correct part, an exact fit and restored my brad nailer to proper operation. Shipping time was reasonable.
Guest - September 28, 2019
Verified Purchase
★★★★★
★★★★★
Good part
Part ok. However the USPS service was a different story. Know it’s Christmas time however left hand doesn’t know what right hand is doing. the post office had more excuses than I count. The people who had my package could not find it in timely manner. I’ll stop here it’s useless to go on.
Have a good day
Dan Kira
Daniel - December 19, 2020
Verified Purchase
★★★★★
★★★★★
Perfect fit replacement.
Perfect fix replacement, good price and fast shipping.
David - January 26, 2021
Verified Purchase
★★★★★
★★★★★
Nail gun repair
Quick shipping and part was perfect fit. Nail gun working like new again
Roger - September 16, 2021
Verified Purchase
★★★★★
★★★★★
simple repair
The part was a perfect match!
Guest - November 15, 2022
Verified Purchase
★★★★★
★★★★★
Repeat customer
The part I ordered this time was what I needed and was received in a timely manner. I ordered a part many years ago which was very hard to find and they had several in stock so I ordered 2 back then. Sometimes parts are no longer being manufactured and they might have some still in stock so I recommend ordering more than just 1. Way too many tool companies produce "throw away" tools which don't have repair parts available. I usually check eReplacementParts.com before I "give up" on a repair.
Guest - November 6, 2023
Verified Purchase
★★★★★
★★★★★
easy repair, stapler works as it should
The part I received was ordered Wednesday July 10,2019. Was "in stock" and will ship immediately. apparently since I did not opt for 2 day shipping the part went into the "whenever" bin. No tracking information was ever available at USPS and the part was delivered Saturday July 20, 2019. Unacceptable!! Not again.
Guest - July 26, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Replaced piston stop bumper and, urethane orange washer. Both items made of plastic and had deteriorated due to age (approx. 20 yrs old). Once, parts replaced stapler performed like new.
Did you find this story helpful?
Thank you for voting!
Brad nailer would only drive 1 brad at at time. piston wouldn\'t retract
Take top of nailer off revealing broken piston bumper stop. Clean top area and inner cylinder; apply light coat of oil to lubricate. Replace piston ring; and install piston in slot. Put top back together and test nailer.
It was helpful to have the parts list & exploded picture of parts and their placement.
Job wa
... Read mores quick & easy; parts were cheap to replace. Beats having it repaired OR buying a new one!!
Read less
Did you find this story helpful?
Thank you for voting!
piston stop bumper was wore out and disintagrated.
Removed trigger assembly and replaced with the new one.
Removed the top to the piston area and removed all the pieces of the old piston stop bumper and replaced with the new one and put it back together
Printed out a parts list.
Dissembled staple gun. Cleaning is a must for repair. Mark down which parts were needed to reassemble. Ordered parts. Piston liner was lightly scared, used a brake hone and cutting oil to take off rough areas. Using the parts list reassembled the gun. Make sure that you use some lubricant for the piston on
... Read more assembly. Connected to shop air, Works like a brand new one.
Remove vent/piston top cover, remove bumper pieces, clean all parts and install new bumper. Install piston/vent top cover and test. Refer to parts diagram for proper assembly.
Removed top assembly and replaced part. Make sure too tighten top screws in a rotation pattern, top left to bottom right or visa versa. Kinda like tightening lug nut on a car tire. Also remember to align top gasket.
AT FIRST I REPLACED THE TRIGGER VALVE, THAT DIDNT FIX IT. NEXT I ORDERED THE PISTON PUMP AND INSERT , THAT DIDNT FIX IT. UPON FURTHER I NOTICED THE PISTON SEAL HAD A CHIP OUT OF IT, WAS UNABLE TO GET THE PART HERE BUT DID FIND IT ON EBAY AND THAT FIXED THE PROBLEM.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
