This is an authentic OEM part for Bostitch pneumatic roofing nailers. The wear plate attaches to the machining cap and is made of metal. During the installation process, a screwdriver and an allen wrench might be needed to replace this part. It will need to be replaced if it becomes broken. This item is available as an individual replacement part even though two are needed.
4 Rubber wear (bumper) plates were dry rot. Ordered new parts. Bottom ones had to slide them on and then pop them in with a clamp. Top ones just attached with two Allen head bolts. Backed out the two bolts put the new part on and put the two bolts back. Very easy to do.
Did you find this story helpful?
Thank you for voting!
Coil roofing nailer wouldn\'t fire air would leak from trigger valve. Wear plate needed replaced
Watched couple you tube videos before receiving parts and also followed directions supplied with new valve. Removed screws holding trigger then removed pins holding valve in with the supplied tool. Old valve didn\'t want to come out so I blew air into with blow gun to remove old valve. Clean the valve bore. Using supplied I ring lube I lu
... Read morebed the new valve o-rings and the inside of the valve bore and slid the new valve in careful not to damage new part. Reinstalled pins,trigger and oiled the gun and tried it out. Works like new again. Wear plate was simple, two allen head screws to remove it and just installed new part.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18979968
Manufacturer Part Number: 149845
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Nailer","title":"Nailer","url":"/parts/power-tool/nailer/"},{"position":2,"name":"Bracket or Flange","title":"Bracket or Flange","url":"/parts/power-tool/nailer/brackets-and-flanges/"},{"position":3,"name":"149845","title":"149845","url":""}]
