Part Location Diagram of 912357-6 Makita Countersunk Head Screw M6x35
See part 114 in the diagram
( Grid squares measure 1x1 inch )

Countersunk Head Screw M6x35 912357-6

Manufactured by:
Makita
ERP Number:
ERP10155647
Part Number:
912357-6
Original Equipment Manufacturer ?
  Works with your model  LS1013F!
$6.16
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

15 - 30 mins 

(3 rated repairs) ?
  Works with your model   LS1013F!

Product Description

?

Genuine Makita replacement part. This countersunk head phillips screw (also called a flat-head) is sold individually.

Troubleshooting

This part works with the following brands:
  • Makita
This part works with the following products:
  • Miter Saw
  • Saw

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Many parts were damaged or missing due to over 10 years of professional use.

Jason from North Las Vegas, Nevada

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
Replaced the power cord and the work light. Replaced the pin that holds the saw in the closed position. Also replaced a few other misc parts. The light, power cord and pin were the biggest reasons I needed to repair just due to safety and ease of use. The pin was the hardest part to replace because I had to remove the large pivot pin that the entire saw hinges on by tapping it out with a mallet and a 1/2\" socket extension. The spring that holds the saw in the up position comes out when the hinge pin is removed making it extremely difficult to put everything back together. I realized after the fact that there are holes just below the spring that you can insert a screw driver or Allen wrench or similar object which holds the spring in the closed position. I still haven\'t figured out if there is an easier way to replace the spring itself since you obviously can\'t hold it in the closed position if you are trying to replace it, but my spring is fine and I don\'t have to worry about that now. There were no websites or videos that I could find to show how this is done, but I figured it out. Would have been easier if there was something that explained the holes for holding the spring before I took it all apart and the spring ejected the saw arm.
Did you find this story helpful?
Thank you for voting!

Fence damaged

Alan from Carleton, Michigan

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
140E52-0, 912357-6, 344463-3
Removed old bent parts and replaced with e-replacement parts.
Did you find this story helpful?
Thank you for voting!

Guide rail cracked due to kickback.

Dan from Elkhorn, Wisconsin

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
Parts Used:
912357-6, 316840-9
Old off, new on. Fit perfectly.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10155647
Manufacturer Part Number: 912357-6
Brand Model Number Description
Makita LS1013 Miter Saw - Miter Saw
Makita LS1013F Miter Saw - Miter Saw
Makita LS1013FL Miter Saw - Compound Miter Saw
Makita LS1013L Miter Saw - Compound Miter Saw
Makita LS1212 Miter Saw - Miter Saw
Makita LS1214 Saw - Saw
Makita LS1214F Saw - Saw
Makita LS1214FL Miter Saw - 12" Dual Slide Compound Miter Saw
Makita LS1214L Miter Saw - 12" Dual Slide Compound Miter Saw with Laser
Makita LS1214LX1 Saw - Saw
Makita LS1220 Miter Saw - Compound Miter Saw
Makita LS1221 Miter Saw - Compound Miter Saw