Part Location Diagram of 687095-6 Makita Strain Relief
See part 38 in the diagram
( Grid squares measure 1x1 inch )

Strain Relief 687095-6

Manufactured by:
Makita
ERP Number:
ERP10153984
Part Number:
687095-6
Original Equipment Manufacturer ?
  Works with your model  LS1013F!
$6.16
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   LS1013F!

Product Description

?

This strain relief is an authentic item that is supplied by the original manufacturer. It is specially designed for use with Makita compound miter saws. The part is secured at the end of the power cord where it connects to the tool. It prevents the cord from bending and cracking. Over time it may wear out or get damaged eventually requiring a replacement. One durable rubber strain relief is included. Check the diagrams of your model for the correct installation of the new part.

Troubleshooting

This part works with the following brands:
  • Makita
This part works with the following products:
  • Miter Saw
  • Saw

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Needed a new power cord, brake was not working.

John from Lake Hopatcong, New Jersey

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
Remove screws from handle to expose power cord, and switch.
Removed wires from power cord connecting to switch one at a time. Make sure you note the terminals that you removed these wires from.
First the white(neutral wire) and the black(hot wire).
Remove the two screws from the power cord hold down clamp.
Replaced power cord and Strain reliever and reinstall the power cord hold down clamp.
Connect both white and black wires to the new switch.
Remove the two brake wires from the old switch noting their position.
Connect the two brake wires to the new switch.
Replace the handle cover screws.

Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10153984
Manufacturer Part Number: 687095-6
Brand Model Number Description
Makita LS1011N Miter Saw - Compound Miter Saw
Makita LS1013 Miter Saw - Miter Saw
Makita LS1013F Miter Saw - Miter Saw
Makita LS1013FL Miter Saw - Compound Miter Saw
Makita LS1013L Miter Saw - Compound Miter Saw
Makita LS1016 Miter Saw - Dual Bevel Slide Compound Miter Saw
Makita LS1016L Miter Saw - 10&#34 Dual Slide Compound Miter Saw
Makita LS1016LX Miter Saw - 10&#34 Dual Slide Compound Miter Saw
Makita LS1016LX5 Miter Saw - 10" Dual Slide Compound Miter Saw with Laser and Stand
Makita LS1016X Saw - Saw
Makita LS1212 Miter Saw - Miter Saw
Makita LS1214 Miter Saw - Dual Slide Compound Miter Saw
Makita LS1214F Saw - Saw
Makita LS1214FL Miter Saw - 12" Dual Slide Compound Miter Saw
Makita LS1214L Miter Saw - 12" Dual Slide Compound Miter Saw with Laser
Makita LS1214LX1 Saw - Saw
Makita LS1216 Saw - Saw
Makita LS1216L Miter Saw - 12&#34 Dual Slide Compound Miter Saw
Makita LS1216LX Miter Saw - 12&#34 Dual Slide Compound Miter Saw
Makita LS1216LX4 Miter Saw - 12" Dual Slide Compound Miter Saw with Laser and Stand
Makita LS1220 Miter Saw - Compound Miter Saw
Makita LS1221 Miter Saw - Compound Miter Saw