Part Location Diagram of 3000005090 Coleman Generator
See part A-5 in the diagram
( Grid squares measure 1x1 inch )

Generator 3000005090

Manufactured by:
Coleman
ERP Number:
ERP12093770
Part Number:
3000005090
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(13 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an Original Manufacturer Sourced replacement part used on some Coleman Gas Lanterns. Generator includes new gas tip, spring, and tip cleaning wire. If the lantern lights for a few seconds then goes out and there is no sound of air passing through the generator, there is either no pressure in the fuel tank or the generator is clogged.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Coleman
This part works with the following products:
  • Lighting

Customer Part Reviews

?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(9 Reviews)
Click to filter by ratings:
  • 5 stars
    8
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(13 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The lantern had sat idle with fuel in it for over 10 years

Leslie from Merrit Island, Florida

26 of 26 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Wrench set
Parts Used:
3000005090, 242J5201
1. Drained what was in the tank and added solvent to soak and breakup fuel solids, drained and reapplied (several applications).
2. Added solvent and 2 dozen steel BBs and shook (two applications),
3. Replaced Generator.
4. Replaced pressure pump stem and piston.
5. Replaced mantels.
6. Reassembled, added fresh fuel, pressurized and fuel tank and lit lantern.
Did you find this story helpful?
Thank you for voting!

Elements would not light. The generator turn liquid fluid into a pressurized gas.

JAY from CHISAGO CITY, Minnesota

12 of 12 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
3000005090
Removed the generator and replaced without damaging the little wire on the end of control rod.
Did you find this story helpful?
Thank you for voting!

Hard erratic starting.

Victor from Machesney Park, Illinois

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
3000004344, 3000005090
Simply remove generator nut and remove old generator, clean tube and replace generator.
Did you find this story helpful?
Thank you for voting!

Globe missing. Generator not working.

Tom from Centre, Alabama

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
Parts Used:
3000005090, 5010000780
1. Replaced missing globe.
2. Removed and replaced generator.
Did you find this story helpful?
Thank you for voting!

Needed new cap generator and general cleaning

mike from tucson, Arizona

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench set
First of all I have a two burner Coleman stove,made in 1964. With the parts I purchased here,and performed quite well on my camping trip. Lantern worked well. Told my friends about this site. Thanks again.
Did you find this story helpful?
Thank you for voting!

replaced pump cup and replaced generator looking for generator for Coleman 321B and also pump assembly

JOHN from Knoxville, Tennessee

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
Parts Used:
2161091, 3000005090
Removed ventilator with pliers on nut
carefully removed globe and set aside for cleaning with generic glass cleaner
removed old mantels with fingers
cleaned frame with greased lighting
Used small pliers to remove pump cap ring
Pulled pump assembly with fingers, used small screwdriver to pry apart the cup seal , replaced with new cup and reassembled with screwdriver and pliers, inspected pump tube with Maglite and found to be relatively clean, reassembled pump into tube and oiled with 3 in 1 oil
installed new Coleman #21 mantels and burned them outside the house, the odor is toxic
replaced fuel cap gasket
Filled fount with filtered Coleman fuel while using plastic Coleman funnel
Carefully pressurized fount with about 40 strokes
used a kitchen match to ignite mantels, first burn always has flames
Used IR thermometer to measure temperature of mixing chamber which was about 500 degrees F
After a 1-2 hour cool down carefully install cleaned globe, install cleaned ventilator, tighten nut with fingers by careful I mean do not touch mantels
Use Nu polish to shine fount and ventilator and shine with old white mean\'s cotton socks
Again re-pressurize with about 5-20 strokes on pump. Lock the pump by rotating clockwise
After a each use of lantern I add 1-2 drops oil through cap oil hole
after about two tanks of fresh fuel, the ventilator reaches 735 degrees F
This lantern has been in my unheated storage building about 20 years.
I light it about once a week
I believe the Model number comes highway 321B

The date impint on bottom of fount is 2 76 which is February 1976






Did you find this story helpful?
Thank you for voting!

Lantern had not been used in over 25-30 years

john from NORTH BRANCH, Michigan

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
3000005090, 2000026613
1. drained old fuel
2 disassembled the lantern
3. gave everything a good scrubbing and saturated the tank with a rust remover and let it soak
4. drained and rinsed out the tank
5. replaced the generator and installed new mantles
6. new fuel added
7. installed new globe
8. pumped up the tank and light the lantern, I will be using the lantern next fall when camping, It was made in the 70\'s and is still in the box it came in from K-Marts
Did you find this story helpful?
Thank you for voting!

Regulator was stopped up and needed to be replaced

Linda from Washington, North Carolina

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Parts Used:
2000032171, 3000005090
Removed old one and installed new.
Did you find this story helpful?
Thank you for voting!

Coleman lantern would not stay lit

Patrick from GENESEO, Illinois

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
Parts Used:
2421071, 2165091, 3000005090
Watched repair on U-TUBE of vintage Coleman lanterns. Followed instructions on package of new generator. Replaced leather pump cup.
Did you find this story helpful?
Thank you for voting!

Coleman lantern generator needed replacement

Glen from Lindsay, Oklahoma

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
3000005090
Removed the globe
Replaced the generator
Reinstalled the globe
Lit the lantern to test
Worked great
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2