After inspecting the carb. found the carb gasket was torn. Further inspection found that the heat dam was broken. Pulled the spark plug to find it somewhat fouled. Both carb bolts were damaged. After removing the intake filter box, removing the carb ***careful of the throttle bar on the left*** remove the carb gasket, remove the heat dam
... Read morevia torx head screws. The heat dam gasket might need to be removed with a putty knife if it was saturated with fuel. Reinstall all the parts in order. Heat dam, gasket, Carb bolts in heat dam with threads outward, heat dam with two torx screws (alignment is tricky) and tighten the torx heads without breaking heat dam, carb gasket (long flat of gasket between engine and gas tank, install the carb with primer bulb on top and don\'t forget the throttle bar, install the filter box and tighten both nuts onto the bolts to ensure a tight fit of carb gasket. Very straight forward with just a bit of a tight area. Last item is the spark plug.Once together, prime and start.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10037691
Manufacturer Part Number: 986317001
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
