This is an authentic Echo replacement part. The intake gasket is commonly found in backpack blowers. This part is made of high-quality plastic, and is used to seal the connection between the insulator assembly and cylinder. Please be aware that there are different gaskets used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require an Allen wrench or screwdriver when replacing this part. This item is sold individually.
Troubleshooting
This part works with the following brands:
Echo
Shindaiwa
This part works with the following products:
Leaf Blower / Vacuum
Part# V103000450 replaces these:
V103000450,
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Exact part
Part arrived on time in perfect condition
Guest - April 28, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I began by removing the plastic cage around the engine in the rear which is held in place by T-25 Torx screws and the air cleaner which is held in place by thumb screws. Once the cover is removed I removed the filter for inspection/replacement and behind it there are (2) phillips screws and (2) T-25 torx screws. I removed the (2) torx as
... Read morethese hold the back of the air box and carb. in place. The screws were around 3+\" in length and once removed with air box rear I was able to access the (2) fuel lines for disconnecting very easily. Mine were somewhat brittle and I cut about an 1/8th\" off in order to get back to more pliable line with easily enough left for reconnecting. The throttle cable was able to be disconnected with needle nose pliers from the carb. easily enough. I attempted to remove the reed valve behind this assembly however it was stuck in place pretty good and i did not want to break it just to replace a gasket which probably doesn\'t need replacing anyway so I skipped this. I installed the new carb. and all associated gaskets including rubber bushings and reassembled. I primed the carb. with the bulb a little more than usual until I felt fuel filling it up to ensure fuel had made it\'s way through the carb. set it to full choke full throttle and it started on the second pull! Runs like a champ again.
Thanks for being so reasonably priced!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9237364
Manufacturer Part Number: V103000450
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_10.gif "Part Location Diagram of V103000450 Echo Gasket-intake")
_WW_10.gif "Part Location Diagram of V103000450 Echo Gasket-intake")
