Genuine OEM replacement part, this item is sold individually. The purpose of the Retainer Cushion is to isolate the vibration of the engine from the frame of the Backpack Blowers shown below. So the user does not experience excessive vibration.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
R
E
Guest - July 25, 2019
Verified Purchase
★★★★★
★★★★★
Part installed easily as expected
After a call to find out if there was a back order, my parts arrived by express mail at no additional charge. I'm extremely grateful.
Guest - November 3, 2019
Verified Purchase
★★★★★
★★★★★
Very satisfied
Exactly what I needed at a good price.
Guest - November 5, 2019
Verified Purchase
★★★★★
★★★★★
Exact match.
Fit my Echo blower perfectly. Not sure how they adhere the rubber to the metal, but appears to be solid and built like the original.
Guest - November 11, 2019
Verified Purchase
★★★★★
★★★★★
Part was just as I wanted. It was easy to install with help from your parts diagram.
The part arrived on time. It has become easier to order power tool replacement parts with confidence in getting the part I wanted for home repair.
Guest - November 20, 2019
Verified Purchase
★★★★★
★★★★★
easy and somewhat quick repair
had to unbolt blower from backpack,( 3 10mm nuts, need deep well with short extension) to get to the 4 philps head screws to put the new mounts on. then return blower to the backpack and the 3 10mm nuts. Now start it and back to work before the Wife yells again!
Guest - January 7, 2022
Verified Purchase
★★★★★
★★★★★
was exactly what I needed and came real fast/.
worked great and was an exact match for the other two on it.
Guest - November 3, 2022
Verified Purchase
★★★★★
★★★★★
Perfect fit
Quality part east to install
Guest - November 29, 2022
Verified Purchase
★★★★★
★★★★★
Fast, prompt service
The parts for my back blower were in perfect condition and made my life easier, now that I fixed the blower myself.
Guest - December 6, 2022
Verified Purchase
★★★★★
★★★★★
Great part, worked as expected
Quick shipping and got the correct parts. Will buy from them again.
Guest - November 14, 2023
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Took of clamps hold intake adapter. removed old adapter and replaced with new and tightened clamps.
Cushions had to remove back of blower to access screws that held cushions. Replace cushions and reinstalled back of blower.
For the cushions you have to remove the nuts so the engine can be separated from backpack frame . At that point screws can be removed that secure cushions from engine. Once done the reassembly process can begin. For the on off switch there is a protective cover over the engine that must be removed (4 screws).This is done in order to unh
... Read moreook engine side of switch. one wire has a connector that just pulls apart the the other is screwed to ground.Next the 2 wires can be removed through a split in the plastic conduit which attaches to control handle.In order to replace the switch the handle must be split . In order to do that the throttle lock lever must be removed (1 screw) the handle its self has a couple of screws which allow it to split . At this point it can be reassembled.
Read less
Did you find this story helpful?
Thank you for voting!
The cushions tore from the attachment area, had to replace whole part.
1. Removed intake adapter clamps.
2. Removed all 3 broken cushions parts from frame.
3. Removed all 3 broken cushion parts from blower unit.
4. Reinstalled new parts and secured to blower first, then frame.
5. Reassembled intake adapter and tighten clamps.
6. The spacing between the frame and blower body is q
... Read moreuite limited. To avoid having to separate the two, I used an angle head Phillips screwdriver. To separate the two, I believe the air filter assemble would have to be removed as well. When removing the nuts off the frame side of the cushions, watch for metal grommets. They will fall out after nuts are removed.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_12.gif "Part Location Diagram of 10090508261 Echo Leaf Blower Retainer Cushion")
_WW_12.gif "Part Location Diagram of 10090508261 Echo Leaf Blower Retainer Cushion")
