- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Jump to:
Product Description
?This is a genuine replacement part manufactured for use with lawnmowers. This belt is used to drive the blades. Belts can wear out over time from normal use, and may loosen or become cracked and pitted eventually breaking. Replacing worn belts is part of normal maintenance. This belt is available as an individual replacement part. • Approximately 66" in length
Troubleshooting
- Weed Eater
- Poulan
- Husqvarna
- Lawn Tractor
Customer Part Reviews
?- < Prev
- 1
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Replaced broken brake cable and worn mower belt
Tom from Huntsville, Alabama
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set
Route new brake cable assembly. Remove old belt and replace with new belt. To make enough room to remove and route the new belt un ... Read more der the engine you need to press and hold down the brake release lever at the rear of the mower.
Reassemble all the components that you removed.
Broken belt
Donald from Portsmouth, Rhode Island
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Socket set, Wrench set
- Parts Used:
- 532428578
Spring holder worn out
Edward from Richland, Mississippi
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set
2. Remove idle pulley.
3. Install new arm.
4. Mount assembly back on deck.
5. Thread the belt around the pulleys.
Belt slippage
john from florissant, Missouri
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
- Parts Used:
- 532428578
- < Prev
- 1
- Next >
Model Cross Reference
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.