This is a genuine OEM sourced replacement part used on riding lawn mowers/tractors. This is the primary belt which drives/spins the blades. Please note the secondary shorter belt is sold separately. This part is made out of rubber material and it is sold individually. Clean the pulleys off before installing the new belt to ensure top performance and longevity with your new belt. Inspect belts periodically and replace them when worn to maintain peak performance. To replace this belt you would need a wrench set.
I removed the mower deck, remove the damaged belt. Looked up the part on eReplacementParts, ordered the part.
Once I received the part I looked up the appropriate diagram to ensure I properly installed the belt.
Also noticed the deck level needed adjustment and found the information for that on the same site.
Too me clo
... Read morese to two hours cause I\'m old and slow, and was not in any hurry. Took a coffee break.
Read less
Did you find this story helpful?
Thank you for voting!
The pulley started coming apart thus damaging the belt also.
Take the 3 screws ( 1/2\" socket ) out of the belt guard. Next remove the pulley locknut ( 7/8\" socket & pliers like channel locks needed ). Next remove the belt. Inspect any other parts on the deck that might need replacement. Last put back together in the reverse order.
The package that the belt is sold in has the routing of the belt right on the package. I jacked up the front of the mower, then put jack stands underneath it and blocked the rear wheels. I remove the blade nuts, then the washers and the blades. I the placed the blade adapters on the spindle, followed by the blades, the washers and tighten
... Read moreed the blade nuts.
Read less
Did you find this story helpful?
Thank you for voting!
Old tractor, pulleys just worn out and belts needed replacing
Removed the deck from the mower
Took note on where the belt was positioned
Installed the new belt in the same way
Removed the blade nuts and washers then the blades
Installed the new blades on the spindles
Replaced the washers and tightened the blade nuts
Then attached the deck to the mower
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP11831568
Manufacturer Part Number: 37X89MA
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_5.gif "Part Location Diagram of 37X89MA Murray Belt Primary 46")
_WW_5.gif "Part Location Diagram of 37X89MA Murray Belt Primary 46")
