9167946-1-M-MTD-942-0616A-Mulching Blade

( Grid squares measure 1x1 inch )

9167946-1-S-MTD-942-0616A-Mulching Blade

9167946-1-S-MTD-942-0616A-Mulching Blade 360 view

Mulching Blade 942-0616A

Manufactured by:: MTD
ERP Number:: ERP9167946
Part Number:: 942-0616A

Works with your model 547-42!

$36.21

★★★★★

7 Reviews

Easy

30 - 60 mins

(15 rated repairs) ?

Works with your model 547-42!

Jump to:

Description Frequently Purchased Together Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

Dimension: 21.23-Inch This is a Genuine Manufacturer Approved Blade used on Riding Mower/Lawn Tractor. This Blade is sold Individually. It is a 3-in-1 blade for mulch, bag and side discharge purposes. This part is designed to circulate the grass longer so it can be cut into smaller pieces. This makes your grass clippings better as mulch since the smaller clippings will decompose more quickly, releasing their nutrients into the soil.

Frequently Purchased Together

V-Belt

★★★★★

(33)

$58.05

Troubleshooting

This part works with the following brands:

MTD
Yard Man
Cub Cadet
Craftsman
Yard Machines
Troy-Bilt
Bolens
Husky
Murray
Ryobi
Toro
Poulan

This part works with the following products:

Lawn Tractor
Lawn Mower
Lawn Tractor Accessories

Part# 942-0616A replaces these:

742-04126, 742-0616, 742-0616A, 7420616, 942-04126, 942-0616, 942-0616A, GW-7420616,

★

Customer Part Reviews

4.3

Average Rating (out of 5):

★★★★★

(7 Reviews)

Click to filter by ratings:

5 stars

5
4 stars

1
3 stars

0
2 stars

0
1 star

1

< Prev
1
Next >

Sort by:

★★★★★

easy to replace

product looked great , fit well, shipping could have been a little better,

Anthony - October 14, 2019

Verified Purchase

★★★★★

Just what I needed

Right part and right time delivered. Had tried to obtain from local mower service company, but they wanted to wait to order till they had enough to make it worth while. After a month (not high mowing season) decided to find it elsewhere. Quick install and used right away. All good. Still 2 weeks later local company has not ordered. Good quality, good service. Thanks

Guest - March 23, 2020

Verified Purchase

★★★★★

Great part

Arrived early great costumer service will definitely order again

Guest - May 15, 2021

Verified Purchase

★★★★★

Two new blades on lawn tractor and new blade on lawnmower Lawnmower grass was nice and even. And no vibration being a new blade. I’m on vacation now I put one mulching blade on lawn tractor, just needed breaker bar to get off, got one on, with do other latter. They were the originals, unbelievable that it even cut the grass, so banged up and missing chunks of metal

Blades look great. And also like idea. Where it tells on blade grass side now.

Guest - June 30, 2021

Verified Purchase

★★★★★

Good fit

Thanks for the help in finding the right part for my ooold mower

Guest - April 18, 2023

Verified Purchase

★★★★★

Was glad to find the blades.

Did not realize blades for my zero turn are designed differently than the blades I have been using.

Guest - August 14, 2019

Verified Purchase

★★★★★

Mulching blades and drive belt

The parts arrived in excellent condition. It took a little longer than expected but that was fine. The concern I have is the the freight was $20.00 and that is absolutely ridiculous. I doubt that I will order from your company again.

David - September 8, 2021

Verified Purchase

Questions & Answers

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

< Prev
1
Next >

Sort by:

Replacement Blades for lawn tractor

Bud For model number 13AL78XS093 - March 18, 2022

Hello Bud, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number:942-0616A. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

eReplacementParts Team

March 18, 2022

Did this question help you?

Does the blade listed below fit a Craftman T130 riding mower? Mower Blade Part Number:532137380

Marco - March 10, 2022

Hello Marco, thank you for your question. The blade is part 942-0616A. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

eReplacementParts Team

March 10, 2022

Did this question help you?

need mower deck blade assembly cant find it

Michael For model number 13AK608G129 - May 16, 2023

Hi Michael, Thank you for writing. The Blade for this model is listed as Part Number: 942-0616A. We hope this helps!

eReplacementParts Team

May 16, 2023

Did this question help you?

Are there mulching blades that fit this Troy Bilt Pony mower? and if so, can I order them here, and for how much?

Sam For model number 13AN77BS011 - March 22, 2022

Hello Sam, Thank you for your inquiry. We have researched the model number you have provided and show the mulching kit as part# 19A70041OEM. The kit includes the blade and the hardware to install it. If you just need the blade, it is part# 942-0616A. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

eReplacementParts Team

March 22, 2022

Did this question help you?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy

30 - 60 mins

(15 rated repairs) ?

< Prev
1
2
Next >

Sort by:

Both blades broke a piece off of them

Anthony from El Dorado, California

13 of 13 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Socket set
Parts Used:: 942-0616A

Used a lift to stand the mower up on end. Removed the nut from blades with a impact gun pulled each blade off and replaced nuts with impact.

Did you find this story helpful?

Damaged blades

Burt from Westcliffe, Colorado

11 of 11 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Socket set
Parts Used:: 942-0616A

Remove hex nut holding the blades, then remove the old blades. Place the new blades on the spindle and tighten the hex nut

Did you find this story helpful?

Replace blades

Michael from Ravenna, Michigan

8 of 8 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set
Parts Used:: 731-04693, 942-0616A

I took off the hex nuts then the old blades and replaced them with the new ones. Then I snapped the hub cap on.

Did you find this story helpful?

Replaced deck belts, transmission belt, drive belt, and blades

Paul from Conyers, Georgia

5 of 5 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: More than 2 hours
Tools:: Screw drivers, Socket set, Wrench set
Parts Used:: 954-04060C, 954-05040, 954-04001A, 942-0616A

Removed deck and replaced parts. I watched the very informative videos on the ereplacementparts website and don\'t think I would have been able to complete the project without them. They where great.

Did you find this story helpful?

Blades were dull, needed new spark plug and mulch plug

William from St. Albans, West Virginia

5 of 5 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set
Parts Used:: 731-2363, 942-0616A, 759-3336

Lift the front of the tractor and put jacks underneath it. Remove the blade nuts from the spindle. Then remove the dull blades. Place the new blades on the spindles and tighten the blade nuts. Then I removed the old spark plug, then gapped the new one at 0.030 then installed it. I then used a nut and bolt to attach the mulch plug to the t ... Read more

Read less

Did you find this story helpful?

Lawn morer blades nuts needed replacing.

Neil from Middlesx, North Carolina

2 of 2 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Socket set
Parts Used:: 942-0616A, 712-0417A

Removed the old nuts and blades and replaced them with the new ones. The old nuts were worn bad. One of them I had to use the touch on.

Did you find this story helpful?

Needed a mulch plug and new blades. I have a yardman rider and it didn\'t really fit but without any directions I made it fit.

Roger from LOVES PARK, Illinois

1 person found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Wrench set
Parts Used:: 731-2363, 942-0616A

1. Removed the old discharge chute
2. Placed plug in the discharge opening, drilled two holes and bolted the plug in place.

Did you find this story helpful?

Blades worn out on mower, cutting very poorly.

David from Mitchells, Virginia

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Socket set
Parts Used:: 942-0616A

1.Soaked the spindle bolts with penetrating oil (WD 40), then using impact wrench and socket, loosened the spindle nuts and removed the old blades.
2. Installed new blades on the spindles and hand tightened the spindle nuts, then using the impact wrench tightened the spindle nuts.
3. Engaged the deck on the mower and did a tes ... Read more

Read less

Did you find this story helpful?

Old seat and old blades

Bruce from CUMMING, Georgia

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set
Parts Used:: 757P06245, 942-0616A

Replaced the old worn seat with a new one.
Removed the blade nuts on the blades, removed them and installed the new ones.

Did you find this story helpful?

Grinding noise, and deck vibration

Arden from Onalaska, Texas

1 person found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Parts Used:: 918-0142C, 942-0616A, 710-1260A

Raised mower with hoist, loosened deck belt, removed blade, removed mounting bolts for spindle, mounted new spindle, adjust belt and deck level. Job done in twenty minutes. New spindle eliminated noisey bearings, and leveling deck eliminated deck vibration. Note: Before installing new spindle, mounting holes were \"started\" by using a 5/ ... Read more

Read less

Did you find this story helpful?

< Prev
1
2
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP9167946
Manufacturer Part Number: 942-0616A

Brand	Model Number	Description
MTD	13A0619G205	Lawn Mower - MTD Lawn Mower Model 13A0619G205 Parts
MTD	13A0619G206	Lawn Mower - MTD Lawn Mower Model 13A0619G206 Parts
MTD	13A0670G788	Lawn Mower - MTD Lawn Mower Model 13A0670G788 Parts
MTD	13A0698G722	Lawn Mower - MTD Lawn Mower Model 13A0698G722 Parts
Yard Man	13A1674G401	Lawn Tractor - Lawn Tractor
MTD	13A1762F500	Lawn Tractor - Lawn Tractor
Poulan	13A1762F552	Lawn Tractor - Transmatic Lawn Tractor
Yard Machines	13A1762F729	Lawn Tractor - Transmatic Lawn Tractor
MTD	13A2606G190	Lawn Mower - Mower
MTD	13A2695G062	Lawn Mower - MTD Lawn Mower Model 13A2695G062 Parts
MTD	13A2791G790	Lawn Mower - MTD Lawn Mower Model 13A2791G790/2006 Parts
MTD	13A3761G000	Lawn Tractor - Lawn Tractor
MTD	13A3761G002	Lawn Tractor - Lawn Tractor
MTD	13A3761G009	Lawn Tractor - Lawn Tractor
MTD	13A3761G016	Lawn Tractor - Lawn Tractor
MTD	13A3761G019	Lawn Tractor - Lawn Tractor
MTD	13A3761G022	Lawn Tractor - Lawn Tractor
MTD	13A3761G026	Lawn Tractor - Lawn Tractor
MTD	13A3761G029	Lawn Tractor - Lawn Tractor
MTD	13A3761G033	Lawn Tractor - Lawn Tractor
MTD	13A3761G054	Lawn Tractor - Lawn Tractor
MTD	13A3761G057	Lawn Tractor - Lawn Tractor
MTD	13A3761G077	Lawn Tractor - Lawn Tractor
MTD	13A3761G098	Lawn Tractor - Lawn Tractor
MTD	13A3761G105	Lawn Tractor - Lawn Tractor
MTD	13A3761G118	Lawn Tractor - Lawn Tractor
MTD	13A3761G121	Lawn Tractor - Lawn Tractor
MTD	13A3761G129	Lawn Tractor - Lawn Tractor
MTD	13A3761G131	Lawn Tractor - Lawn Tractor
MTD	13A3761G134	Lawn Tractor - Lawn Tractor