Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
9105840-1-M-MTD-712-0417A-Use 712-0417a
Part Location Diagram of 712-0417A MTD Use 712-0417a
See part E35 in the diagram
( Grid squares measure 1x1 inch )
9105840-1-S-MTD-712-0417A-Use 712-0417a Part Location Diagram of 712-0417A MTD Use 712-0417a

Use 712-0417a 712-0417A

Manufactured by:
MTD
ERP Number:
ERP9105840
Part Number:
712-0417A
Original Equipment Manufacturer ?
  Works with your model  13AF688G371!
$10.61
★★★★★
★★★★★
9 Reviews
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(18 rated repairs) ?
  Works with your model   13AF688G371!

Jump to:

Frequently Purchased Together Reviews Questions & Answers Repair Instructions

Frequently Purchased Together

?
Washer Flat .635
★★★★★
★★★★★
(1)
$7.75
In Stock
Minimum Quantity of 2 required

Troubleshooting

This part works with the following brands:
  • MTD
  • Cub Cadet
  • Craftsman
  • Troy-Bilt
  • Yard Machines
  • Yard Man
  • Murray
  • Bolens
  • Husky
  • DeWALT
  • Ryobi
  • Toro
  • Poulan
This part works with the following products:
  • Lawn Tractor
  • Lawn Mower
  • Snow Blower
  • Edger
  • Lawn Tractor Accessories
  • Engine
  • Trimmer
Part# 712-0417A replaces these:
712-0417, 712-0417A, 712-0417A-CM, 712-0417AP, 7120417, 7120417A, 753-05549, 912-0417A, GW-7120417A, YS-712-0417A,
★

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(9 Reviews)
Click to filter by ratings:
  • 5 stars
    9
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
It fit
It fit on the bottom of the spindle, which is where it is supposed to go.
Guest - May 13, 2019
Verified Purchase
★★★★★
★★★★★
Direct fit
It arrived quick. Fit perfect simple fix
Guest - July 4, 2019
Verified Purchase
★★★★★
★★★★★
Pair of nuts saved as use when needed..
Pair of nots for attaching mower blades.
Guest - October 9, 2019
Verified Purchase
★★★★★
★★★★★
Exact replacement
The nut as the exact part needed, arriving promptly.
Guest - October 25, 2019
Verified Purchase
★★★★★
★★★★★
Mower parts
The parts arrived quickly and they were the right size. They worked perfectly! Thanks!
Guest - April 13, 2020
Verified Purchase
★★★★★
★★★★★
Easy order ,will ordercfrom you again thanks
Great condition
Edgar - April 13, 2020
Verified Purchase
★★★★★
★★★★★
Easy fix it
Parts fit properly an received them in a timely manner.
Guest - April 15, 2020
Verified Purchase
★★★★★
★★★★★
The right nut for the right job
Fit perfectly. Cross-check your owner's manual when in doubt.
Guest - June 2, 2020
Verified Purchase
★★★★★
★★★★★
Worked great, nice to have a place to order parts! Ereplacement Parts is fantastic!
Fit perfectly and I received it within a week!
Robert - June 30, 2021
Verified Purchase

Questions & Answers

?

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?
  • 1
Sort by:  
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
PART # 712-04064 USEDFOR SCREWING IN THE MOWER BLADE
Al For model number 17ARCACS011 - November 7, 2022

Hello Al, thank you for your question. No, this is not the correct one. The correct one is the Hex Flange Nut part 712-0417A that helps to secure the blade. Good luck with your repair.

eReplacementParts Team
November 7, 2022

Did this question help you?
Thank you for voting!
THIS BOLT LOOKS LIKE THE BOLT THAT HOLDS THE BLADE ON THE MANDREL 7000 ELITE SERIES 247-204420-CAN YOU CONFIRM
DON For model number 247.204420 - September 10, 2022

Hello Don, Thank you for your inquiry. We do not show this part as compatible to the model number you have provided. For the model number that you have provided, the blade is actually attached to the spindle shaft, part# 738-1010A, by means of a flange nut, part# 712-0417A.We hope this helps and if you need help placing an order for a part, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

eReplacementParts Team
September 10, 2022

Did this question help you?
Thank you for voting!

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(18 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Spindle shaft broke at the hex flange nut (secures the blade to the spindle)

Barry from YELLVILLE, Arkansas

7 of 7 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
938-04241, 923-0448A, 712-0417A
1. Removed the deck from the tractor by removing three cotter keys and pins (lift mechanism for raising and lowering the deck).
2. Remove blades (must secure blade with wooden block), remove spindles from deck, remove pulleys from spindles, drive out spindle shafts being careful to note placement of washers and spacers.
3. Pac ked spindle housing with grease using a finger.
4. Install new spindle shafts and wipe away excess grease.
5. Use reverse order to complete the job.
Read less
Did you find this story helpful?
Thank you for voting!

Deck was not working, needed new pullies, belts and blades.

Scott from Orlando, Florida

7 of 8 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
753-08171, 918-0240C, 954-0467A, 954-0349, 918-04134D, 712-0417A
1. Removed the old belts.
2. Removed the deck.
3. Replaced the pulleys and then the belts.
4. Reinstalled the deck.
5. Replaced the belts.
6. Tested, cut grass.
Did you find this story helpful?
Thank you for voting!

Blade hit a rock and broke nut that held blade on

Avery from Trinity, North Carolina

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
712-0417A
Bought new blades and used the new hex head nuts to fasten them on
Did you find this story helpful?
Thank you for voting!

Needed all new belts and blades

EVELYN from PAWLING, New York

3 of 4 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
954-04060C, 942-0611A, 954-04032B, 712-0417A
Lowered mowing deck. Replaced three belts and put on two new mowing blades. Not difficult but its is a good idea to take a picture with your cell phone of the old belts prior to removing. It is a good reference guide and many times easier than a manual. A picture is worth a thousand words !!!!!!!!!!!!!!!
Did you find this story helpful?
Thank you for voting!

Replace bad spindle

John from PAIGE, Texas

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Socket set
Parts Used:
918-04822B, 712-0417A
Used floor jack. Jacked up riding mower. Raised deck to highest level. Used impact tool to remove blade nut and 4 spindle bolts. Lowered deck to lowest level. Removed old spindle. Install new spindle tighten 4 3/8 spindle bolts. Install blade and new spindle bolt for blade.
Did you find this story helpful?
Thank you for voting!

Replace blades and nut

ADAM from Grass Valley, California

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Socket set
Parts Used:
942-04290A, 712-0417A, 714-04040
use 1\" socket to secure blades, slide deck under lawn tractor, hook up belt on front pulley, align holes and raise deck to fit, install cotter pins
Did you find this story helpful?
Thank you for voting!

Stripped blade nut

lawrence from Westport, New York

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
712-0417A
Heated the old nut and removed it with a reverse twist socket, replaced the blade, installed a new flange nut DONE
Did you find this story helpful?
Thank you for voting!

Lawn morer blades nuts needed replacing.

Neil from Middlesx, North Carolina

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
942-0616A, 712-0417A
Removed the old nuts and blades and replaced them with the new ones. The old nuts were worn bad. One of them I had to use the touch on.

Did you find this story helpful?
Thank you for voting!

Lawn edger belt broke. Hex screw was stripped.

Jerry from Baton Rouge, Louisiana

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench set
Parts Used:
954-04032B, 712-0417A, 710-1143A
1. Removed old hex screw and nut
2. Installed new belt
3. Installed new hex screw and flange nut
Did you find this story helpful?
Thank you for voting!

Pulley was worn out replaced belt as well

Johnny from Harlingen , Texas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable), Wrench set
Parts Used:
756-05031, 736-0351, 712-0417A, 714-04043
Lowered deck to replace worn belt and notice that pulley was bad order replacement. I really a applaud you all for having the Schematic to show the actual breakdown . This really helped in completing the task
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
Use 712-0417a
$ 10.61
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖