Genuine Manufacturer Approved Carriage Bolt is a standard part that fits a variety of products. This part is sold individually and the Nut is not included. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the bolt and keeps it from turning when the nut is tightened.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
momo needed to fix her lawnmower
exactly the parts we needed and the parts guide for momo's lawnmower was very helpful
Guest - April 15, 2020
Verified Purchase
★★★★★
★★★★★
bolt
good quality - fits correctly
Guest - July 28, 2020
Verified Purchase
★★★★★
★★★★★
I always find what I need here.
I could have gone to the hardware store and paid much more. I can get it here at a much better price though, if I can wait a couple of days. Everything is mailed quickly and of the highest quality. AAA+++
John Lazur - September 22, 2020
Verified Purchase
★★★★★
★★★★★
Great replacement
Thanks for the easy shopping keep up the good work!
Guest - October 28, 2020
Verified Purchase
★★★★★
★★★★★
The parts arrived quickly
The parts were easy to put on and worked well.
Guest - October 30, 2020
Verified Purchase
★★★★★
★★★★★
Great part- worked well
The part fit perfectly- arrived as expected
Guest - March 30, 2021
Verified Purchase
★★★★★
★★★★★
Worked as expected
Does what it's supposed to do.
Guest - June 3, 2021
Verified Purchase
★★★★★
★★★★★
exact part fit perfectly
Exactly the part I needed mower is better than new
Patrick - June 28, 2021
Verified Purchase
★★★★★
★★★★★
hard bolts
always get right part for the job
Guest - March 2, 2023
Verified Purchase
★★★★★
★★★★★
Right part and on time
Arrive quickly and was the correct part and fit perfect. Great service.
Guest - July 9, 2024
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed the back undercarriage piece and pull off one side of the rear door assembly (spring).
2. Then removed the handle bracket
3. Then removed the wheel adjuster from the handle bracket
4. Put new adjuster on the bracket.
5. Replace bracket.
6. Secure the carriage bolt and nut (had to buy an extra one s
... Read moreince i discovered i was missing another one.
7. Replace undercarriage piece.
8. Put on the wheel and we\'re golden!
Read less
Did you find this story helpful?
Thank you for voting!
Bent mower deck.
Roger from Warsaw, Missouri
3 of 3 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
1. Removed the mower deck.
2. Removed the pulleys, removed the mandrel housing, removed the baffles, removed the clean out attachment
3. Reinstalled the mandrel housing, the pulleys, the baffles, clean out the attachment on the new mower deck.
4. Reinstalled the new mower deck.
1. Rather than removing the locking nut, to save time used bolt cutter to cut the mounting rod.
2. Used a small ball peen hammer and small punch to knock out the rod.
3. Thoroughly cleaned the area on the mower deck where the mounting rod is installed.
4. Used the existing spring, after cleaning it, that mounts with the
... Read morerod.
5. Used the locking pliers to retain the spring in place of the deflector.
6. Lined the deflector up on the permanent mounting brackets on the mower deck and
installed the new mounting rod.
7. Used the locking pliers and a 3/8GÇ¥ socket and the ball peen hammer to apply the new lock
nut.
This completed the task.
The baffle is easy to replace. Best to remove the deck to give you more operating room (Husqvarna YTH22V46). remove the two lock bolts holding the Baffle on and replace the new baffle with new locking nuts. Slide the deck under the tractor and hool up the deck.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
