It is an authentic Toro hardware. The thrust washer is supplied from the original equipment manufacturer for use on lawn mowers. It is utilized to provide a tight fit between connected components of the drive wheel mechanism. Unfortunately, over time the material will tend to wear out and the may get damaged eventually requiring a replacement. To ensure the exact location and the correct application of this item, refer to the appropriate diagrams of your model. Note, one durable metal thrust washer is included. You will need a wrench set to remove the wheel when replacing this hardware.
1. Removed the rear wheel assemblies.
2. Removed the drive mechanism retaining c-clip on both rear wheels.
3. Removed the drive mechanisms.
4. Replaced the parts listed above and completed the repair on both rear wheels.
Note: Washer-Clutch and Ring-friction are the most common wear problems but, I replaced
... Read moremost everything since the mower was 7-yr old and still running very good.
Took parts off and laid them in a line as I removed. Opened the new parts bags and placed the next to the old parts. Then systematically installed the parts substituting new parts for old.
Removed tire and replaced height adjustment arm. Pretty easy job, works great.
Did you find this story helpful?
Thank you for voting!
Rear drive wheel gear and pinion were engaging intermittently due to the wobbling of the wheels. Wobbling of the wheels was caused by excess wear to the wheel bushings.
Removed rear wheel shoulder bolt.
Removed the rear wheel.
Removed the plastic drive gear housing.
Removed pinion gear retaining clip.
Removed the pinion gear.
I replaced other parts on the ends of the wheel drive shaft, but it was not actually necessary.
Installed the new pinion gear.
Installed th
... Read moree pinion gear retaining clip.
Installed the plastic drive gear housing.
Greased the wheel gears, pinion gears, wheel bushings and shoulder bolts liberally.
Replaced the wheel.
Replaced the shoulder bolt.
1. Disassembled rear power wheels and removed the trans-axle.
2. Went on-line and found exploded drawing of the trans-axle.
3. Amazed to find the missing, damaged, worn out parts for a 25 YO mower and ordered same.
4. Received ALL ordered parts a week later and reassembled the trans-axle.
5. Mower works a good as n
... Read moreew.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9293002
Manufacturer Part Number: 65-4740
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(1994)_WW_7.gif "Part Location Diagram of 65-4740 Toro Thrust Washer")
(1994)_WW_7.gif "Part Location Diagram of 65-4740 Toro Thrust Washer")
