This friction ring is an authentic item which is supplied by the original manufacturer for Toro lawn mowers. It is one of the special parts that helps to provide a tight seal between components. Over time it may wear out, get damaged or simply lost eventually requiring a replacement. This high-quality friction ring is made of a durable material and is sold as an individual component. Note, you may need a wrench set to remove and resecure the hardware that holds this part. Check the diagrams of your specific model for the exact location and the correct application of this hardware.
1. Removed the rear wheel assemblies.
2. Removed the drive mechanism retaining c-clip on both rear wheels.
3. Removed the drive mechanisms.
4. Replaced the parts listed above and completed the repair on both rear wheels.
Note: Washer-Clutch and Ring-friction are the most common wear problems but, I replaced
... Read moremost everything since the mower was 7-yr old and still running very good.
Took parts off and laid them in a line as I removed. Opened the new parts bags and placed the next to the old parts. Then systematically installed the parts substituting new parts for old.
Replaced friction ring and clutch washer.
On the first attempt the clutch washer was not in the correct position relative to the rocking key.
The two recessed areas on the clutch washer look similar but the correct one allows the key to rock into position when the transmission is engaged.
The Toro service manual, avai
... Read morelable online, explains how the clutch system works and how to test. I used white lithium grease on the installed parts.
Working well now.
1. Disassembled rear power wheels and removed the trans-axle.
2. Went on-line and found exploded drawing of the trans-axle.
3. Amazed to find the missing, damaged, worn out parts for a 25 YO mower and ordered same.
4. Received ALL ordered parts a week later and reassembled the trans-axle.
5. Mower works a good as n
... Read moreew.
Used the repair guide diagram to determine what washers, nuts etc... I was missing. Then ordered them and used the guide to reinstall. Very thankful. Rather than spending several hundred on a new mower. I fixed mine for about 60 all in. eParts were about $20 plus expedited shipping. Considering covid impact, I was mowing again in a
... Read moreweek! Love this place.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9053764
Manufacturer Part Number: 65-4710
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(1994)_WW_7.gif "Part Location Diagram of 65-4710 Toro Friction Ring")
(1994)_WW_7.gif "Part Location Diagram of 65-4710 Toro Friction Ring")
