This is a genuine OEM sourced replacement part designed for use with lawn mowers. This thrust washer helps to secure the pinion gear. It helps to distribute the pressure evenly and provides a tight seal for the connecting pieces. It is made out of metal and it is sold individually. Replacing this washer you would need a wrench and pliers.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Toro lawnmower
Quick delivery and everything arrived in perfect shape and fit
Guest - October 22, 2021
Verified Purchase
★★★★★
★★★★★
Lawnmower is up and running!
I bought front and rear wheels for an old Toro, lawnmower, as well as a pinion gear.
Everything I ordered fit perfect and service and delivery were great!
Keith - September 4, 2023
Verified Purchase
★★★★★
★★★★★
Parts good , shipping not !
Parts fit fine but I ordered the parts on 10/1/2021 and they supposedly were sent out that day but they didnt arrive until 10/12 /2021 . For $5.95 shipping and handling, 11 days is much too long !
Guest - October 16, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Disconnected spark plug. Removed grass bag. Raised mower up on wooden 2x4s to access back wheels (did not tilt mower).
2. Removed left wheel with a socket set.
3. Removed ring clip with screw driver and needle nose pliers.
4. Removed pinion gear and thrust washer while holding down key on shaft. Quickly examined condi
... Read moretion of key and didn\'t replace.
5. Replaced with new pinion gear, new thrust washer and new ring clip. Slid pinion gear on with L on outside (facing direction you would be standing to use mower), thrust washer and put on gloves to push ring clip onto shaft. The pinion gears have L and R engraved on them and are interchangeable.
6. Replaced old wheel with new wheel. Gears on old wheel were worn too. Used socket set to reinstall wheel.
7. Repeated for the right side.
8. Tested and self propelled worked. Although the left wheel would not move when I backed up. I had the tension too tight on the self propelled cable. Loosen nut near handle and eased back on the tension in the cable. Mower backs up and self propelled works like new. Mower is about 12-14 years old and is a Toro Personal Pace.
Read less
Did you find this story helpful?
Thank you for voting!
Drive gear components were missing/spring for key was broken
When we investigated the reason for the self-propel not working, we found numerous parts missing and the gear off the shaft. Replaced parts and reassembled and thankfully it is working like a charm. Just followed the parts diagram. And take your time.
First I removed the shoulder bolt with the impact wrench. Then removed the wheel. Removed the clip ring, then the thrust washer. I then removed the pinion gear just by pulling it off. Replace the old thrust washer, clip ring, and thrust washer. To assemble just reverse the order of the tear down.
Did you find this story helpful?
Thank you for voting!
I\'m not sure exactly what happened. My wife called me and said that the tire exploded. The plastic hub had twisted up like a straw.
I set the lawn mower up on blocks. Installed the spring, set the shafts key over the spring, slid the gear over top. Put the washer in place, used needle nose pliers to lock in the snap ring, put the tire on and used a 1/2\" socket to tighten up the tire. Very easy.
Did you find this story helpful?
Thank you for voting!
Wheel Cover Asm broke allowing foreign material into wheel drive gear causing displacement of gear and retaining parts.
LawnBoy lawnmower with rear drive wheels:
Disassembled the other drive wheel (one bolt) to determing which parts were missing from the other broken side and how it should be re-assembled. Once again have two rear drive wheels! Easy fix. Thank you eReplacementParts for providing PayPal payment option and quick delivery.
Remove the wheel by removing the bolt holding it on to the mower. Then remove the wheel. Install the thrust washers on the shaft, then the gear, then place the clip ring on the end of the shaft and replace the wheel.
Removed front wheels, drive gears, key and spring. Thrust washers were broken along with locking ring clip.
Replaced wheel bears just because I had the front end apart.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2006)_WW_8.gif "Part Location Diagram of 105-6840 Toro Thrust Washer")
(2006)_WW_8.gif "Part Location Diagram of 105-6840 Toro Thrust Washer")
