This is an authentic replacement part manufactured for use with walk-behind lawnmowers. The gearcase gasket is used to seal the connection between the upper and lower gearcase covers. This gearcase gasket is available as an individual replacement part, please see model diagram for associative parts.
Troubleshooting
This part works with the following brands:
Toro
Lawn Boy
Jet
This part works with the following products:
Lawn Mower
Part# 105-6839 replaces these:
105-6839,
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed back wheels, gears and axel.
Removed mower blade and belt.
Rebuilt transmission and repackaged with grease.
Reassembled and found an extra spacer. Eventually found it went in between the main engine shaft and the blade\'s shaft-bracket. If you leave this off then the engine won\'t turn due to clamping friction
... Read more of the bracket against the engine\'s bottom.
After reassembling with all new parts and testing, the left wheel gears still sounded bad (grinding). Read different website forums from 2010-now where some people fixed this design/tolerance issue by adding spacers between the left wheel mount and the mower body. I added those and the grinding went away.
Opened the transmission, cleaned all the old grease and dirt from every part, put a washer on the drive gear to make up fit the gear wear, packed it with new grease and put it back together. It works again!
1. Had to take rear wheels, and all shafts off wheels { watch half moon keys and springs under}. mark R/L sides. remove gear box
2 take gear box apart
2 a , Had to clean out old grease , clean up gear box
3 take pinion gear out{ can put socket on both ends to unscrew}
4 Didn\'t have to replace ring gear
5. pu
... Read moret grease in gear box , put gear box together
6 reinstall gear box.
7. taking gear box out of mower was hardest part, I watch u-tube 1st ,Kinda made it easier.
8
Read less
Did you find this story helpful?
Thank you for voting!
Drive gears worn out.
Roger from Milford, Michigan
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
1.Got Toro manual for drive system on line.
2.Disassembled drive system by removing front axle and removing gears from gear box.
3.Ordered gears and gasket from ereplacementparts.
4.Reassembled, greased gear box and axle assembly. Works great.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP8826663
Manufacturer Part Number: 105-6839
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/lawn-and-garden/lawn-mower/seals-and-gaskets/"},{"position":2,"name":"105-6839","title":"105-6839","url":""}]
(2006)_WW_12.gif "Part Location Diagram of 105-6839 Toro Gasket-gearcase")
(2006)_WW_12.gif "Part Location Diagram of 105-6839 Toro Gasket-gearcase")
