Part Location Diagram of 736-0447 MTD Wave Wash. 1-In. I.D. X 1.5-In.
See part C70 in the diagram
( Grid squares measure 1x1 inch )

Wave Wash. 1-In. I.D. X 1.5-In. 736-0447

Manufactured by:
MTD
ERP Number:
ERP9410987
Part Number:
736-0447
Original Equipment Manufacturer ?
  Works with your model  Z-FORCES60LP!
$6.16
In Stock
Delivers in 3-5 Business Days!
Minimum Quantity of 2 required

Easy 

15 - 30 mins 

(5 rated repairs) ?
  Works with your model   Z-FORCES60LP!

Product Description

?

This is a genuine replacement part that has been sourced from the original manufacturer to be used with lawnmowers from MTD, Ryobi, and Troy-Bilt. The metal wave washer is used to provide cushioning between part assemblies along a shaft. It is recommended to review your model\\\'s diagram to verify the washers compatibility. This item is sold as an individual replacement part.

Troubleshooting

This part works with the following brands:
  • MTD
  • Cub Cadet
  • Troy-Bilt
  • Yard Man
  • Yard Machines
  • Husky
  • Craftsman
  • Bolens
  • Ryobi
This part works with the following products:
  • Lawn Mower
  • Lawn Tractor
Part# 736-0447 replaces these:
583308, 736-0408, 736-0447, 936-0447,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(5 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Parts missing

william from wofford heights, California

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
736-0447, 736-0277
Remove the blade bolt and the blade support, then the blade. Remove the blade adapter with pulley. Install one of the flat washers on top of the adapter, then the wave washer, then the other flat washer. Then install the adapter. And replace the blade.
Did you find this story helpful?
Thank you for voting!

Had to replace the lower drive pulley assembly

mark from Wilmington, North Carolina

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Removed the blade, pulley cover, and cover attachment that was connected at both rear wheels, carefully aligned new parts, reassembled and tested, works great! Saved $80 in labor!!!
Did you find this story helpful?
Thank you for voting!

Bell blade support was cracked

john from sutton, Massachusetts

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Take out blade screw and related parts replace with the new ones changed all parts that hold the blade in place didn\'t replace blade because I had just sharpened it.
Did you find this story helpful?
Thank you for voting!

Blade mounting adapter broken

Richard from Athens, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
753-06304, 736-0447, 942-0741A
1. Removed the spark plug wire
2. Raised the mower to get access to blade
3. Removed blade support, blade and blade to shaft adapter
4. Installed new wave washer, blade adapter, new blade and blade support
Did you find this story helpful?
Thank you for voting!

Repair drive pulley and replace drive wheel

Andy from Cottage Grove, Tennessee

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
734-04018C, 736-0447, 736-0277
Removed the blade and the adapter, installed the washer, the wave washer, the second washer, the blade adapter and the blade. Removed the wheel retaining nut and the wheel. Installed the new wheel and reinstalled the nut.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9410987
Manufacturer Part Number: 736-0447
Brand Model Number Description
MTD 119-476R170/64255 Lawn Mower - Lawn Mower
MTD 120-178E000 Lawn Mower - Lawn Mower
MTD 120-178E06295143 Lawn Mower - Lawn Mower
MTD 120-560B000 Lawn Mower - Lawn Mower
MTD 120-560B009 Lawn Mower - Walk-Behind Mower
MTD 120-560B033/72776 Lawn Mower - Self-Propelled Walk-Behind Mower
MTD 120-560B054 Lawn Mower - Coast To Coast MDL
MTD 120-560B192 Lawn Mower - Lawn Mower
MTD 120-560B205 Lawn Mower - Lawn Mower
MTD 120A560B101 Lawn Mower - Lawn Mower
MTD 121-236E000 Lawn Mower - Lawn Mower
MTD 121-476E000 Lawn Mower - Lawn Mower
MTD 121-478E000 Lawn Mower - Lawn Mower
Husky 121-478E13144-18459 Lawn Mower - Lawn Mower
MTD 121-478E137 Lawn Mower - Lawn Mower
MTD 121-478E7019221 Lawn Mower - Lawn Mower
MTD 121-478E7159821 Lawn Mower - Lawn Mower
MTD 121-560B000 Lawn Mower - Lawn Mower
MTD 121-560B009 Lawn Mower - Lawn Mower
MTD 121-560B033/75525 Lawn Mower - Self-Propelled Walk-Behind Mower
MTD 121-560B101 Lawn Mower - Lawn Mower
MTD 121-560B105 Lawn Mower - Lawn Mower
MTD 121-560B141 Lawn Mower - Lawn Mower
MTD 121-560B192 Lawn Mower - Lawn Mower
MTD 122-440R000 Lawn Mower - Lawn Mower
MTD 122-440R002 Lawn Mower - Lawn Mower
MTD 122-440R054 Lawn Mower - Lawn Mower
MTD 122-440R088 Lawn Mower - Lawn Mower
MTD 122-440R205 Lawn Mower - Lawn Mower
MTD 122-440R372 Lawn Mower - Lawn Mower