This is a genuine OEM replacement kit. It includes the Blade Adapter,Bell Blade Support and the Hex Cap Screw that secures the blade to the Mower. When you use this kit, this is a good time to clean the underside of your mower and you could also sharpen your blade.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Worked perfectly
Customer service rep [Dale] was great, part arrived promptly and fit great. Thank you
Guest - July 30, 2019
Verified Purchase
★★★★★
★★★★★
Excellent!! Did as expected
Quick shipping. Very Pleased.
Guest - September 2, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair
This website has had about every part I’ve needed to fix things I have had to work on over the years, I give it a two =ƒæì =ƒæì up !!
Guest - December 11, 2019
Verified Purchase
★★★★★
★★★★★
Great support
Correct part, arrived quickly, site easy to navigate
Guest - September 13, 2020
Verified Purchase
★★★★★
★★★★★
Worked as expected!
Exactly what I needed. Prompt delivery! Thank you!
Guest - May 27, 2021
Verified Purchase
★★★★★
★★★★★
No problem
The part's I ordered came and were in good condition. I repaired my lawnmower and now it's running like new
Guest - June 17, 2022
Verified Purchase
★★★★★
★★★★★
Lawnmower repair
The part was perfect, it arrived on time and was well priced! Thank you!
Guest - May 1, 2023
Verified Purchase
★★★★★
★★★★★
Just what my mower needed
Item was perfect. You had in stock with a speedy delivery. Got my mower up and running at a good price
Guest - July 3, 2023
Verified Purchase
★★★★★
★★★★★
the blade on the mower goes around and around, like the wheels on the bus
needed the part and it was available -- and the right part this time (local shop sold me a universal which does not fit any mower on this planet) ---- should have gone with this company to start with
Guest - October 23, 2023
Verified Purchase
★★★★★
★★★★★
Purchased Kit
The parts were a perfect fit. After I was able to get the main bolt secured, everything went together. I would purchase other parts as needed.
Guest - May 28, 2021
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove any fuel from the tank, then tilt the mower with the air cleaner facing up. Put a heavy duty glove on one hand to hold the blade while removing it. Remove the blade bolt and blade support. Then the blade. Remove the the broken blade adapter, then clean the engine shaft. Place the new adapter on the shaft lining up the key in the ad
... Read moreapter and the slot on the engine shaft until it bottoms out. Install the blade, the blade support, then the blade bolt.
Ensure mower gas is empty, turn lawn on side, turn mower blade to line up with grass shoot, place crowbar on correct side of shoot to brace blade, use 5/8 socket to remove Hex bolt, remove blade and blade support, remove blade adapter, install new blade adapter using slot, place blade on blade adapter lining up the blade in the x key, pla
... Read morece blade brace on blade lining pins with holes in blade, install hex bolt and tighten after placing crow bar on opposite side of grass shoot to brace the blade to keep the blade from spinning. Tighten to correct ft lbs as instructed. Turn mower on all 4 wheels, fill with gas and go! .
Read less
Did you find this story helpful?
Thank you for voting!
Original Part That The Blade Bolted To On Engine Shaft Broke
1. Disconnected spark plug.
2. Attempted (unsuccessfully) removal of blade adapter using gear puller.
3. Resorted to side grinder with cutoff blade, cutting adapter into 3 pieces.
4. Sanded crankshaft to remove rust.
5. Applied bearing grease to help prevent more rust.
8. Installed new adapter obtained from e
... Read moreReplacementParts.com.
9. Installed new blade without any additional complications.
Read less
Did you find this story helpful?
Thank you for voting!
Lawn mower throwing a lot of dirt and debris while cutting lawn
1. Lean mower over on its left side.
2. With a pair of garden gloves on hold the blade firmly with one hand
3. With the other hand use a rachet wren or nut driver to remove the 15mm bolt
4. One bolt is remove the blade and adapter will come off
5. Installation is reversedoing.
After kit install no
... Read moremore flying debris :)
Removed the blade, pulley cover, and cover attachment that was connected at both rear wheels, carefully aligned new parts, reassembled and tested, works great! Saved $80 in labor!!!
Remove the spark plug and tilt the front of the mower (with the spark plug) up to access the blade. Hold the blade with a gloved hand and remove the bolt, brace, blade and blade adapter. Clean the engine drive shaft and install new blade adapter, blade, brace and bolt. Lower mower and reconnect the spark plug. That is all there is to
... Read moreit, takes about 15 to 30 minutes.
I removed the old block that was broken and replaced with the new replacement kit. I used a 5/8 socket to remove and replace the part. Everything works fine. Thanks for the great service.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10009638
Manufacturer Part Number: 753-06304
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Tune Up Kit","title":"Tune Up Kit","url":"/parts/lawn-and-garden/lawn-mower/tune-up-kits/"},{"position":2,"name":"753-06304","title":"753-06304","url":""}]
_WW_1.gif "Part Location Diagram of 753-06304 MTD Kit-service Replac")
_WW_1.gif "Part Location Diagram of 753-06304 MTD Kit-service Replac")
