The Blade Adapter is an authentic OEM part and is for a Craftsman Lawn Mower. This part is used to attach the mower blade the motor shaft. When replacing this part it is recommended to disconnect the spark plug wire and wear protective work gloves. The metal adapter is an individually sold replacement part.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect fit
Reasonable price and fast delivery!!!=ƒæì=ƒæì=ƒæì=ƒæì
Guest - August 12, 2019
Verified Purchase
★★★★★
★★★★★
Easy install.
Part arrived on time and fit perfectly.
Guest - September 13, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair. Part fit as expected
The blade adapter on my TroyBilt push mower with Honda engine had the inside key broken out of the wall. Apparently from hitting something. I sourced a new blade locally (old one was worn out) but could not find the adapter anywhere. I measured the engine shaft to be sure it was 25mm and it was. Ordered the new adapter from eReplacementparts using the p/n from the TroyBilt parts diagram for my mower. Installed new blade, new adapter and used the old bolt and bell piece. Did not have a torque wrench so just tightened the bolt as tight as it would go. Back in business.
Guest - April 23, 2020
Verified Purchase
★★★★★
★★★★★
Easy Lawn Mower Repair
Great experience. Website had an exploded view of my lawn mower so it was easy to find and order the parts. Parts arrived earlier than estimated. The parts I ordered were a exact copy of the old ones so everything fitted correctly.
Guest - May 20, 2020
Verified Purchase
★★★★★
★★★★★
Worked as intended and easy to install.
this part fit and worked well.
Guest - October 16, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair, easy ordering, fast service
The part was a perfect fit. My lawnmower is working perfectly again.
Guest - June 21, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Drilled out broken screw, and used an easy out to remove it. Removed the blade adapter by tapping on it. I then install the new one by lining up the key inside of it with the key slot on the engine shaft. And I tapped it on. I then attached the blade to the adapter with blade support. And the blade bolt and tightened it into the shaft. W
... Read moreorks great now.
Read less
Did you find this story helpful?
Thank you for voting!
Screw missing from shelf propelled pulley and belt, blade adapter broken, side discharge missing.
Honda 22\" cut Self Propelled Mower.
Replaced screw.
Anti seized cotter key slot and bolted blade, keeper, and blade adapter to motor shaft.
Side discharge deflector snapped in after lifting mulching cover.
Note: Same Mower with Briggs & Stratton motor requires different size blade adapter.
1. Remove spark plug wire
2. Empty gas from tank
3. Turn mower on its side
4. Use an appropriate wrench to remove the bolt, the blade, and the blade adapter. Be sure to wear leather gloves when handling the mower blade.
5. Replace the blade adapter, the blade, and the bolt. BE SURE TO TIGHTEN THE BOLT SO THE BLADE
... Read moreDOES NOT COME OFF! You may need to wedge a piece of wood between the blade and the mower deck to keep the blade from rotating while tightening the bolt.
1. Blade removed after disconnecting spark plug.
2. Drive shaft adapter removed and replaced.
3. Drive belt and associated upper/lower pulley parts replaced.
4. Replacement bolt and bell blade support used to secure mower blade.
1. Extracted the remaining piece of bolt.
2. Placed the blade adapter on the shaft.
3. Assembled the cutting blade and the keeper on the blade adapter.
4. Inserted a new bolt and tightened.
5. Started the engine and happily mowed the lawn.
Thanks, eReplacementParts for making this repair so easy.
Removed the blade bolt and the blade support then the blade
Removed the broken blade adapter and installed the new one
Installed the blade, the support and tightened the blade bolt
Turn the lawn mower on the engine oil side (done turn on filter side)
remove the nut with wrench
Replace the adapter and screw it with a new hex nut
It was very easy.
Did you find this story helpful?
Thank you for voting!
One of the blade centering pins on each side of the center star flange sheared off.
First I removed the blade bolt and the blade support then the blade. I had to tap the blade adapter with a mallet to remove it from the shaft. I then cleaned the shaft up. Lined up the key inside of the new adapter to the key slot on the engine shaft and tapped it on with the mallet. I placed the blade on the adapter then the blade suppor
... Read moret and tightened it all up with the blade bolt.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9113644
Manufacturer Part Number: 748-04082
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 748-04082 MTD Adapter-blade 25mm")
_WW_1.gif "Part Location Diagram of 748-04082 MTD Adapter-blade 25mm")
