This is a genuine replacement part sourced directly from the manufacturer. The arm brake is commonly found in Craftsman lawn tractors. This part is made of metal with an attached brake pad, and is connected to the idler arm to help control the speed of the machine. You may require a wrench when replacing this product. This item is sold as an individual replacement part.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Exact fit easy to replace Thanks
Arrived as expected as instructed.
Guest - June 14, 2019
Verified Purchase
★★★★★
★★★★★
Parts sent promptly to a friend who is bringing them to me in Ontario, Canada
Have not yet received the parts, but expect them soon. The ladies that helped me with the order over the phone after I had trouble doing so on line where very nice, very patient, and very helpful. Great experience doing business with Y'all. Business done right!
Guest - August 17, 2019
Verified Purchase
★★★★★
★★★★★
Fit great
Worked as it should
Guest - October 2, 2019
Verified Purchase
★★★★★
★★★★★
Exactly what it was supposed to be and easy to replace
Fit and worked perfectly
Guest - April 2, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
Great part, fast arrival, working like new. Satisfied with service. Great customer service.
Guest - April 7, 2020
Verified Purchase
★★★★★
★★★★★
Great Parts
We have used this company for many parts for a lawn tractor that is 13 years old. All parts have been of good quality and emails from this company have always been timely. Shop with trust.
Paul - June 19, 2020
Verified Purchase
★★★★★
★★★★★
great part
its arrived to late, you need to send by fedex or UPS because it 12 days to get to me. the poster services is slow.
Guest - August 25, 2020
Verified Purchase
★★★★★
★★★★★
All parts fit perfectly.
Repair made easy with good fitting replacement parts.
Guest - April 20, 2021
Verified Purchase
★★★★★
★★★★★
replacement part.
perfect replacement.
Guest - August 17, 2021
Verified Purchase
★★★★★
★★★★★
Arm Brake for mover deck
The needed piece was available and shipped out as promised. I have used eReplacement parts on several occasions. Each time the part(s) ordered have arrived on time. The parts schematics are also very helpful.
Guest - May 3, 2022
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed mower deck from lawn tractor.
2. Pushed idler pulley inward to relieve pressure on arm brake and used a wooden block to hold it in place.
3. Using a socket wrench, remove the two bolts holding the brake arm in place.
4. Remove the brake arm and replace it with the new brake arm.
5. Leaving the block in
... Read moreplace, remove the second brake arm.
6. Be careful this brake arm has its own spring and has considerable tension on it.
7. Remove the brake arm assembly, noting how each piece of the assembly is placed.
8. Place the brake arm washer in place and place the new brake arm over the washer.
9. Place the spring and spring washer in place, making sure the end of the spring is properly placed on the brake arm.
10. Place the brake arm bolt in the center hole and tighten in place.
11. Remove the wooden block.
Read less
Did you find this story helpful?
Thank you for voting!
The brakes on the mower deck were worn and the idler arm was not keeping belt tension
Removed the deck from mower. Easier to remove then I thought
Inspected and removed worn out parts. Got parts numbers from my manual.
Found Replacement Parts.Com on line and called the phone number.
Every part was on in stock. Delivered in a few days. Order was complete and accurate.
I used the impact wrench to
... Read morebrake off the bolts that hold the
mandrel assemblies. These are self taping screws that will not be reusable. Note: the mandrel assemblies had the required 4 screws in the box. I have a smooth running deck. Mower cuts like new again. As long as the motor is good I will rebuild the deck again.
Thank you Replacement Parts this was a great project.
Read less
Did you find this story helpful?
Thank you for voting!
Blade brakes were worn out, the Blades need replacing and the grass shout lost the spring
Pulled the hanger pins that hold the deck
Removed old Blade brakes
Replaced with new brake arms and pads
Adjusted the brake release arm
Removed grass shroud
Replaced the spring
Replaced shroud
Replaced deck under the mower
Hung deck back on mower
Started cutting Grass
Did you find this story helpful?
Thank you for voting!
Brake, torsion spring assembly were worn out.
Glenn from Charlottesville, Virginia
2 of 2 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Pulled mower deck from frame. Removed old brake and torsion spring assembly. Reattached the spring to the brake (difficult). My mower is a Craftsman 42\" deck. The brake, opposite the discharge side, has never lined up with the belt pulley. Instead of being paralell, it positions at an angle which causes the brake pad to wear at the very
... Read moreedge only. I found it impossible to reposition it for correction. I installed it \"as is\" and will inspect often for wear. Also, after the deck was reinstalled, I took time to do the leveling. I found that it was way out of line. Refer to this process in the owners manual, it is very important to have a good looking lawn.
Read less
Did you find this story helpful?
Thank you for voting!
Lawn tractor deck removed and cleaned, new parts installed
Removed deck
cleaned deck
lubricated parts
installed new ereplacement parts
reinstalled deck
checked tractor for proper running condition
proceeded to cut grass
Did you find this story helpful?
Thank you for voting!
Deck broke, needed Mandrel cover
Linda from Smyrna, Tennessee
1 personfound this instruction helpful.
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
This was a used lawn tractor.The deck broke and that was replaced. Plus we put the Mandel on ,it did not have one on the left side so we put that on and the belt won\'t slip off now. We put on the brakes that refurbished.. so we are good to go . Thanks customer
1. Remove the mowing deck
2. Simply remove the bolts holding the brake mechanisms and replace.
3. The left side is spring loaded and needs a little special attention. This is the trickiest part of re assembling. Be sure to observe this mechanism before disassembly.
4. Replace the mowing deck.
Did you find this story helpful?
Thank you for voting!
Mower deck, parts almost worn out - Engine, replaced gaskets after valve adjustments
Deck - removed old parts and installed new ones, simple repair.
Engine - Required valve adjustment due to hard starting, adjusted valves, ordered new gaskets, replaces, again a very simple repair.
No special tools or instructions necessary.
When replacing engine gaskets, ensure oil level in engine is at the proper level
... Read more as
some oil (minimal) be lost during valve cover removal and reinstallation.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9016882
Manufacturer Part Number: 532199478
Lawn Mower
- Husqvarna Lawn Mower Model 96041002907 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Transmission or Clutch","title":"Transmission or Clutch","url":"/parts/lawn-and-garden/lawn-mower/transmissions-and-clutches/"},{"position":2,"name":"532199478","title":"532199478","url":""}]
(96042003402)_WW_8.gif "Part Location Diagram of 532199478 Husqvarna Lawn Mower Brake Arm")
(96042003402)_WW_8.gif "Part Location Diagram of 532199478 Husqvarna Lawn Mower Brake Arm")
