1. Unbolt front wheel assembly from mower body.
2. Remove bolt from assembly, noting original washer placement.
3. Remove broken adjuster plate from wheel assembly. You may have to cut/remove the old adjuster grip in order to slide plate out of assembly. Note orientation of the plate\'s curve.
4. Insert new adjuster plat
... Read moree, matching the plate curvature to the original.
5. After new adjuster plate is in the wheel assembly, slide adjuster grip over the end of the adjuster plate. The hole in the grip goes over the locking tab side of the plate.
6. Bolt the front wheel assembly back onto the mower body, matching the original washer placement.
7. Align adjuster tab with desired height adjustment notch on mower body. Lubricate as necessary for ease of wheel height adjustment.
This was an old Honda mower my kid picked up a couple of years ago. I welded the left front axle assembly back together and installed the new adjuster levers on both front axels.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP11892200
Manufacturer Part Number: 42952-952-000
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(VinHR194-1000001)_WW_13.gif "Part Location Diagram of 42952-952-000 Honda Grip, Adjuster")
(VinHR194-1000001)_WW_13.gif "Part Location Diagram of 42952-952-000 Honda Grip, Adjuster")
