Shindaiwa Trimmer Hoses and Tubes

The purpose of the 13201056330 Fuel Return Tube is to return the excess fuel back into the fuel tank, after the primer bulb has been pressed and has primed the carburetor to start. After time the Fuel Return Line will become brittle and crack and will need to be replaced.

This is an authentic OEM sourced replacement part. This special fuel pipe assembly is used to deliver gasoline from the tank to the carburetor. When the primer bulb is pressed, fuel will be forced through this line into the carburetor. It is made out of flexible plastic and it is sold individually. Please note, clips, joints and the fuel filter are all sold separately.

OEM replacement part, this item is sold individually. This tube is connected to the fuel line grommet. Depending on the model you have it is either on the outside of the fuel tank or the inside of the fuel tank It is attached to the fuel filter inside the tank. When the primer bulb is pressed, fuel will be forced through this line into the carburetor. It is used on the model numbers shown below.

This is a genuine OEM part. The fuel line grommet w/vent tube is constructed of plastic parts and is compatible with trimmers, edgers, blowers and brushcutters. This item is fastened onto the fuel tank, moving the fuel to the breather assembly. This Shindaiwa part is sold individually. The fuel tank assembly (P021028090) also includes this component. A screwdriver is often helpful in the removal a...

It is a genuine item that is supplied by the original manufacturer for use with gas powered Shindaiwa and Echo trimmers and brush cutters. This replacement pick-up tube is used to deliver fuel from the tank into the carburetor, it is the line that the in-tank fuel filter is attached to. Over time the material may begin to deteriorate and crack eventually requiring replacement for safe operation. I...

This is an original Shindaiwa replacement part manufactured for use with outdoor power equipment. The joint is used to connect fuel lines and is commonly used to connect the return fuel line to the fuel tank grommet. This joint is sold individually, please seem model diagram for associative parts.

This is an authentic Shindaiwa replacement part manufactured for use with Shindaiwa trimmers. This special fuel line is used to return the fuel back to the tank when priming the carburetor, so it is the shorter line. The return fuel line is sold as an individual replacement part.

This is an authentic OEM part. The poly, Echo pipe-return-3x6x85mm is compatible with many various lawn and garden tools. This part is often fitted onto the grommet on the fuel tank. It is recommended to refer to specific manuals and diagrams for repair instructions. This part is sold individually. A screwdriver is helpful in the repair.

This replacement fuel pipe is a genuine OEM item, it is specially produced for use with Echo and Little Wonder gas powered equipment. This is only the return pipe, note that the supply pipe is sold separately. By pressing the primer bulb it will fill the carburetor with fuel, once it is full the excess fuel will be forced back into the tank through the fuel return line. Over time the material may ...

This tube is an authentic replacement part provided by the original equipment manufacturer. It is used in Shindaiwa machines such as trimmers, edgers, and and blowers. This tube is made of plastic, and it should be replaced if it is kinked or punctured. It is sold individually and is not difficult to replace.