MTD Trimmer Hoses and Tubes

This is a genuine OEM approved replacement part, it is specially designed for use with Craftsman gas powered lawn and garden equipment. By pressing on the purge bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. Over time the material may begin to deterio...

The 791-682039 Fuel Filter and Line, filters the fuel in the tank as it is forced into the carburetor up by means of the primer bulb. To install. Remove retainer ring from fuel line. Insert fuel line thru gas cap opening. Thread fuel line thru hole in bottom of the fuel tank. Pull fuel line thru to firmly seat against inside tank wall. Put retainer ring on fuel line,hold line and press ring firml...

This fuel line is an original part from Craftsman for trimmers, blowers, edgers and cultivators. This part is supplying gas, starting with the tank to the carburetor. You will need a screw driver, pliers, a hose pulling wire and cutters to replace this part. This fuel line is made of rubber and sold individually.

The purpose of the 791-182352 Fuel Return Tube is to return the excess fuel back into the fuel tank, after the primer bulb has been pressed and has primed the carburetor to start. Over time the Fuel Return Line will become brittle and crack and will need to be replaced.

This is an authentic replacement part sourced from the original manufacturer for use with trimmers made by Craftsman. This part goes inside the trimmer head and spins to cut grass and weeds. This part is made of durable plastic and sold individually.

This is an original replacement part manufactured for use with outdoor power equipment. The breather hose is commonly used to allow combustion gasses to escape the crankcase. This breather hose is available as an individual replacement part, please see model diagram for associative parts.

It is a genuine OEM item that is designed for use with a variety of lawn and garden equipment. The breather tube is used to guide the direction of excess gasses and fluid that escape the engine from a higher level of internal pressure. If the part is cracked, damaged or missing, this will provide an identical replacement for the original component that was installed on a new unit. Note, this high-...