Husqvarna Trimmer Wheels and Rollers

This is a manufacturer approved mow ball assembly used on some Wheeled Trimmers. Mow ball assembly prevents the trimmer from scalping the grass. This Assembly includes the Plastic Housing, Ball Bearing and a Retaining Ring. Please note Bolt used to attach this assembly is Sold Separately.

This is a genuine manufacturer approved item. It is supplied directly from original equipment manufacturer for use with walk-behind lawn mowers. It allows unit to be mobile for easy movement/transportation. This wheel is made out of plastic and it is sold individually. Please note, the axle bolt and the washer that secures this wheel are sold separately. A wrench will be needed to replace this wheel.

This is an original replacement part manufactured for use with handheld leaf blowers. The flywheel has magnets on its side that create an electric charge as the magnets pass the ignition module. The electric charge is sent to the spark plug to fire the air-fuel mix in the cylinder. The flywheel fits on the crankshaft by a key that aligns with a keyway on the crankshaft, this allows for proper firi...

This is a genuine OEM sourced replacement flexshaft that is specially designed for Husqvarna and Poulan trimmers and edgers. It fits inside the drive shaft housing to drive the cutting head. It is made from durable metal and it is sold individually.

This flexible drive shaft fits inside the drive shaft housing assembly to drive the cutting head. It is a genuine manufacturer approved replacement item that is specially designed for Weed Eater string trimmers. Eventually, the rounded ends will fail to engage the trimmer head. It is also possible to kink or even break the drive shaft cable by stopping the trimmer head very rapidly. It is made fro...

This genuine item is supplied by the original equipment manufacturer for use with Husqvarna trimmers. It is a high-quality replacement for a missing or a faulty upper shaft that was included with a new unit. The part houses the flexible shaft that rotates the cutting head, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and applica...

This replacement shaft kit is a genuine part sourced from original manufacturer. This is the lower curved portion of the two-piece shaft. It is used in some Husqvarna lawn trimmers, including model 128CD. This is a three (3) part kit which includes one (1) each of: lower driveshaft, dust cap, and trimmer head. The dust cap and trimmer head can be purchased separately as well (see below). Associat...

This replacement starter driver kit is designed to keep your outdoor power equipment running smoothly and reliably. Compact and durable, it is manufactured to match the original specifications for a precise fit and dependable operation.

This is an authentic replacement part manufactured for use with Husqvarna trimmers. The lower shaft kit is used to house the driveshaft and this kit includes the inner driveshaft housing and grease to reduce friction between the driveshaft and housing. This lower shaft kit is available as an individual replacement part.

This is an original Husqvarna, Jonsered part for use with Brush Cutters, Edgers, and Trimmers. The flexible drive shaft fits inside the drive shaft housing to drive the cutting head. The most common reason for replacing the flexible drive shaft is if the trimmer head is not spinning and makes noise, the engine idles but the head won't move when throttled, the driveshaft ends are stripped or the fl...

It is a genuine item is supplied by the original equipment manufacturer for use with Husqvarna handheld brushcutters and trimmers. This is an identical replacement for a missing or a faulty flexible drive shaft that was installed on a new unit. Please make sure to refer to the appropriate diagram of your model for the correct location and application of this component. Keep in mind this high-quali...

This driveshaft is designed to transfer rotational power from the engine to the cutting head, ensuring smooth and consistent performance during operation. Measuring approximately 59 3/4 inches in length with a durable spline connection, it provides reliable power delivery through the shaft housing. Built for strength and long-lasting use, it is an ideal replacement for worn or damaged shafts, help...

This is an authentic Poulan replacement part that has been sourced from the original manufacturer to be used with trimmers. The metal flywheel attaches to the crankshaft outside of the case and is used to create a spark when the magnets on the side of the flywheel pass the ignition module. This item is available as an individual replacement part.

This genuine manufacturer-sourced part is specially made for use with Weed Eater trimmers. It is an identical replacement for a missing or a faulty output shaft that was installed on a new unit. This is the part that the blade attaches to. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality p...

This guide/support wheel is a durable component designed to provide stability and controlled movement for outdoor power equipment during operation. It helps maintain consistent cutting depth while guiding the tool smoothly across uneven surfaces, edges, and hard terrain. Constructed from high-impact, wear-resistant material, it is built to handle continuous contact with soil and pavement while mai...