Part Location Diagram of 575260201 Husqvarna Upper Shaft Kit
See part A-13 in the diagram
( Grid squares measure 1x1 inch )

Upper Shaft Kit 575260201

Manufactured by:
Husqvarna
ERP Number:
ERP16367531
Part Number:
575260201
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(10 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Troubleshooting

This part works with the following brands:
  • Poulan
  • Husqvarna
  • Craftsman
  • Weed Eater
This part works with the following products:
  • Trimmer
  • Pole Saw
Part# 575260201 replaces these:
530071791, 530071936, 545003366, 574767101, 575260201,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(2 Reviews)
Click to filter by ratings:
  • 5 stars
    2
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(10 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Female plastic coupling for square ended cable was stripped (rounded out.)

George from Columbus, Wisconsin

7 of 7 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
575260201
1. Saw old female plastic coupling was rounded out.
2. Applied appropriate curses with vigor.
3. Ordered replacement assembly.
4. Removed old upper shaft assembly and housing, per instruction manual.
5. Installed new upper shaft assembly and housing, per instruction manual.
6. Went out and whacked the h eck out of some tall grass.
7. Amazed my wife that I actually read an instruction manual...................
Did you find this story helpful?
Thank you for voting!

Upper shaft broken end fitting

John from ARIEL, Washington

7 of 7 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
575260201
Removed half of throttle handle using screw driver only . Removed old shaft replaced with new shaft only fits one way , only one way for locking screw to fit replaced screws and unit worked like a champ. Very simple
Did you find this story helpful?
Thank you for voting!

Pole saw too short

Thomas from BELLE, Missouri

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
575260201
Add another shaft
Did you find this story helpful?
Thank you for voting!

End of upper shaft broke under heavy load from tiller attachment

tom from grapeview, Washington

5 of 5 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
575260201
Removed the old one replaced with new one. Easy
Did you find this story helpful?
Thank you for voting!

Lower section of shaft could not be securely installed

Gilbert from Oak Grove, Missouri

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
575260201
Carefully, removed the upper section of shaft and then install new section in its place. This requires removal of throttle lever and kill switch. Removal of these components requires much care. I have Parkinson\'s and I shake like a leaf in the wind. This adds to the difficulty in making repairs.
If possible, I would suggest not rem oving the throttle and kill switch assembly. Simply loosen it and slide the shaft through it.
Did you find this story helpful?
Thank you for voting!

Bent shaft

Roy from Beckley, West Virginia

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
575260201
Just simply removed the old shaft and installed the new one
Did you find this story helpful?
Thank you for voting!

Inner shaft connection worn out

Elridge from N. Chesterfield, Virginia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
575260201
Inner shaft connection worn out to attach different

Pieces
Did you find this story helpful?
Thank you for voting!

Damaged shaft

Alston from New Bern, North Carolina

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)
Parts Used:
575260201
Just replaced the old upper shaft with the new one. Works great!
Did you find this story helpful?
Thank you for voting!

Trimmer head would not turn

Kenny from Seneca, South Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
575260201
1.Took apart the trigger assembly, leaving the trigger, spring, stop wire, and throttle cable intact.
2. loosened the shaft from main body.
3. pull old shaft out through the trigger assembly.
4. pushed the new shaft in aligning the notch, in the shaft, with the main body.
5. Tightened the shaft screws to the main body.
6. Reassembled the trigger assembly.
Good to go!
Did you find this story helpful?
Thank you for voting!

Female end of flex shaft was worn out.

Roger from Chardon, Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Parts Used:
575260201
Take out all screws, remove old upper shaft, then install new one.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP16367531
Manufacturer Part Number: 575260201
Brand Model Number Description
Poulan 325 Edger - 325 - Poulan Pro Gas Trimmer - Pro Trimmers And Edgers
Craftsman 358.791032 Trimmer - 2-Cycle Gasoline Weedwacker
Craftsman 358791030 Trimmer - Trimmer
Craftsman 358791031 Trimmer - Trimmer
Craftsman 358791032 Trimmer - Trimmer
Craftsman 358791040 Trimmer - Trimmer
Craftsman 358791041 Trimmer - Trimmer
Craftsman 358791042 Trimmer - Trimmer
Craftsman 358791050 Trimmer - Trimmer
Craftsman 358791051 Trimmer - Trimmer
Craftsman 358791060 Trimmer - Trimmer
Craftsman 358791061 Trimmer - Trimmer
Craftsman 358791070 Trimmer - Trimmer
Craftsman 358791071 Trimmer - Trimmer
Craftsman 358791072 Trimmer - Trimmer
Craftsman 358791140 Trimmer - Trimmer
Craftsman 358791170 Trimmer - Gas Trimmer
Craftsman 358791590 Trimmer - Trimmer
Craftsman 358795820 Trimmer - Trimmer
Craftsman 358795821 Trimmer - Trimmer
Craftsman 358795822 Trimmer - Trimmer
Craftsman 358795920 Trimmer - Trimmer
Craftsman 358796600 Trimmer - Trimmer
Craftsman 944515560 Trimmer - Trimmer
Craftsman 944516560 Trimmer - Trimmer
Craftsman 944516561 Trimmer - Trimmer
Weed Eater 96114000410 Lawn Mower - Rotary Lawn Mower
Poulan MC025 Trimmer - Poulan String Trimmer Model MC025 Parts
Poulan MC125 Trimmer - Poulan String Trimmer Model MC125 Parts
Poulan PP025 Trimmer - Pro Gas Trimmer