Craftsman Trimmer Transmissions and Clutches

Genuine OEM replacement kit used on Gas Trimmers and Tillers. This part includes: Clutch Drum, Clutch, Clutch Washer and the Screw which has a left-handed thread. A centrifugal clutch is a part that uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. Today's centrifugal clutches will function even when they shouldn't, far beyond the point...

This clutch assembly engages and transfers power from the engine to the drive shaft or cutting attachment, allowing smooth operation while letting the engine idle without spinning the tool. Replacing a worn clutch can resolve issues such as improper idling, loss of power, or poor performance, helping restore reliable operation.

This item has been OEM sourced to ensure a high level of quality. The gearbox assembly is intended to be used with trimmers from Husqvarna and Jonsered. The gearbox attaches to the bottom of the lower drive shaft. This item is used to connect the rotation of the shaft with the rotation of the cutting head. This gearbox is sold as an individual replacement part.

Gearbox lcbc

This is an OEM sourced replacement part used on Gas Trimmers. A centrifugal clutch is a part that uses centrifugal force to connect two concentric shafts, with the driving shaft nested inside the driven shaft. Today's centrifugal clutches will function even when they shouldn't, far beyond the point of when they need to be replaced. Keeping an eye on equipment performance will determine when the ce...

This is an authentic replacement part manufactured for use with Husqvarna brushcutters and trimmers. The driver assembly fits on the bottom of the gear case and is used to cover the spindle and bearings. This driver assembly is sold as an individual replacement part.

It is an authentic manufacturer-sourced replacement part which is specially designed for use with Craftsman Trimmers. The Gearbox Assembly contains the gears that turn the line spool for cutting. The most common reason for replacing the gearbox assembly is if the trimmer head is not spinning or there is grinding noise coming from the trimmer head. The gearbox assembly includes 3 screws, mounting h...

The metal clutch has been OEM sourced to be used with trimmers, pruners, and brushcutters from Poulan, Weed Eater, Husqvarna, and Jonsered. The clutch assembly fits into the clutch drum and is connected to the motor's drive shaft. The clutch allows the machine to idle without driving the cutting head. This part is sold as an individual item.

This is a genuine OEM sourced replacement part designed to work with string trimmers. This part is attached to the lower boom assembly and it is what drives/spins the trimmer head. It is secured to the unit with two (2) screws. Internal gears or the gear box are not sold separately. This assembly includes the trimmer head. To complete this repair you will need a screwdriver.

This is for the original clutch. This is just the drum. If you need the clutch pawl and washers you will need to get the knew version Assembly part number 791-182369, because the original internal parts for the clutch are obsolete.rnDiameter 2 9/16"

This sprocket assembly kit is produced by original manufacturer. It is compatible with various Poulan power tools. Each kit includes one (1) each of: sprocket, washer, and sprocket retainer. Each item is available separately as well. Sprocket item # 530056520 Washer item # 530056521 Sprocket retainer item # 530056563

This is an OEM sourced replacement part used on Husqvarna and Jonsered trimmers and brushcutters. The clutch drum works in unison with the clutch. Together, they make it possible for the engine to idle without rotating the trimmer head. When the throttle is applied, the clutch assembly expands into the clutch drum, which activates the trimmer head. This high-quality clutch drum is made of durable ...

This part has been sourced from the original manufacturer to ensure a high level of quality. The gearbox assembly is intended to be used with trimmers from Weed Eater and Poulan. This is a pre-assembled gearbox that includes all the gears, bearings, and linkages. This part is used to connect the lower drive shaft and the cutting head assembly and to allow the two parts to rotate in unison. This ge...

This is an original part from Craftsman for use with Trimmers. The clutch drum engages with the clutch to spin the flex shaft and cutting head. The most common reasons for replacing the clutch drum is if the trimmer head is not rotating under the throttle, the trimmer head stops when under load (when the line contacts the lawn, weeds, etc.), the drive shaft is not engaging, the clutch is not engag...

This is an original replacement part sourced directly from the manufacturer. The sprocket retainer is commonly found in Poulan pruners, trimmers, and chainsaws. This part is made of metal, and is generally used to secure the sprocket in the gear assembly. You may require an Allen key, a wrench, and pliers when replacing this product. This item is sold as an individual replacement part.

This is an authentic replacement part manufactured for use with grass trimmers. The gearbox assembly links the drive shaft and the trimmer head. The gearbox is a complete part assembly that includes the internal gears, housing, and spindle shaft. This gearbox assembly is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine item that is supplied by the original equipment manufacturer for use with trimmers. The metal clutch goes between the clutch drum and the clutch washer. It helps to spin the cutting head and the flex shaft. It may require a screwdriver and a hammer for installation. This clutch is available as an individual replacement part and comes with a washer.