OEM MTD Leaf Blower / Vacuum Parts & Accessories

Trimmer Carburetor – Part Number: 753-06190

$43.01

Manufacturer Part Number:: 753-06190

A carburetor basically consists of an open pipe through which the air passes into the inlet manifold of the engine. The pipe is in the form of a Venturi: it narrows in section and then widens again, causing the airflow to increase in speed in the narrowest part. Below the Venturi is a butterfly valve called the throttle valve ' a rotating disc that can be turned end-on to the airflow, so as to h...

Carburetor O-ring

★★★★★

(8)

$4.13

Minimum Quantity of 2 required

Manufacturer Part Number:: 753-06185

This is a manufacturer approved O-Ring designed for lawn and garden equipment. This is the O-Ring that provides an Air Tight seal between Carburetor and Cylinder Head. If doing maintenance on carburetor it is recommended to replace the O-Ring instead of re-using the old one. Over time rings and seals tend to dry out and would no longer provide proper seal compromising engines performance.

Spark Plug

★★★★★

(21)

$9.29

Manufacturer Part Number:: 753-06847

This is a genuine OEM sourced part which is specially made for use with Craftsman handheld lawn and garden equipment. Its purpose is to deliver electric current from the ignition system to the combustion chamber. It will ignite the air fuel mixture by the spark. Unfortunately, over time a spark plug can wear out or it may get damaged eventually requiring a replacement to ensure peak performance. K...

Lawn Mower Ground Drive Belt

★★★★★

(44)

$33.35

Manufacturer Part Number:: 954-04032B

This genuine drive belt is an original replacement part sourced directly from the manufacturer and is commonly used in Craftsman lawn mowers and edgers. Made from flexible rubber, it transfers power from the engine to the pulley that drives the cutting blades. Over time, the belt may become brittle or cracked due to wear and exposure, requiring replacement to maintain optimal performance. Measurin...

Carburetor Gasket

★★★★★

(16)

$4.13

Minimum Quantity of 2 required

Manufacturer Part Number:: 753-06253

This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.

CARBURETOR

★★★★★

(37)

$43.96

Manufacturer Part Number:: 753-06288

Line, Fuel Return

★★★★★

(12)

$10.22

Manufacturer Part Number:: 791-181086

This fuel line is an original part from Craftsman for trimmers, blowers, edgers and cultivators. This part is supplying gas, starting with the tank to the carburetor. You will need a screw driver, pliers, a hose pulling wire and cutters to replace this part. This fuel line is made of rubber and sold individually.

AIR FILTER

★★★★★

(10)

$6.58

Manufacturer Part Number:: 753-05254

This is an authentic manufacturer-sourced component which is specially designed for Craftsman trimmers. Its purpose is to filter out dust and debris from contaminating the carburetor and engine, unfortunately, over time it will wear out and may get clogged eventually requiring a replacement to maintain peak performance. When replacing the filter you can open the package in comes in and put a bit o...

Primer and Hose Assembly

★★★★★

(49)

$30.64

Manufacturer Part Number:: 791-683974B

This is a genuine OEM approved replacement part, it is specially designed for use with Craftsman gas powered lawn and garden equipment. By pressing on the purge bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. Over time the material may begin to deterio...

Petrol Line Assembly

★★★★★

(27)

$20.76

Manufacturer Part Number:: 791-682039

The 791-682039 Fuel Filter and Line, filters the fuel in the tank as it is forced into the carburetor up by means of the primer bulb. To install. Remove retainer ring from fuel line. Insert fuel line thru gas cap opening. Thread fuel line thru hole in bottom of the fuel tank. Pull fuel line thru to firmly seat against inside tank wall. Put retainer ring on fuel line,hold line and press ring firml...

Aircleaner Filter

★★★★★

(7)

$4.99

Manufacturer Part Number:: 791-181757

This is a genuine OEM replacement part, it is sold individually. The purpose of the filter is to keep dust and debris from contaminating the carburetor and engine. To replace the filter you can place it in a plastic bag with a little oil and rub the oil into the filter. Then remove the filter and squeeze it in a paper towel to remove the excess oil.

Impeller Asm

$9.76

Manufacturer Part Number:: 753-08491

MTD Leaf Blower / Vacuum Parts

Top MTD Leaf Blower / Vacuum Models

Popular MTD Leaf Blower / Vacuum Parts

MTD Leaf Blower / Vacuum Models

Shop by Popular MTD Leaf Blower / Vacuum Part Types

MTD Leaf Blower / Vacuum Parts

Search By Model or Part Number

Top MTD Leaf Blower / Vacuum Models

Popular MTD Leaf Blower / Vacuum Parts

MTD Leaf Blower / Vacuum Models

Shop by Popular MTD Leaf Blower / Vacuum Part Types