MTD Leaf Blower / Vacuum Hoses and Tubes

This is a genuine OEM approved replacement part, it is specially designed for use with Craftsman gas powered lawn and garden equipment. By pressing on the purge bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. Over time the material may begin to deterio...

The 791-682039 Fuel Filter and Line, filters the fuel in the tank as it is forced into the carburetor up by means of the primer bulb. To install. Remove retainer ring from fuel line. Insert fuel line thru gas cap opening. Thread fuel line thru hole in bottom of the fuel tank. Pull fuel line thru to firmly seat against inside tank wall. Put retainer ring on fuel line,hold line and press ring firml...

This fuel line is an original part from Craftsman for trimmers, blowers, edgers and cultivators. This part is supplying gas, starting with the tank to the carburetor. You will need a screw driver, pliers, a hose pulling wire and cutters to replace this part. This fuel line is made of rubber and sold individually.

This nozzle door attaches to the discharge opening of chipper, shredder, and leaf vacuum equipment to help direct airflow while shielding the operator from debris. Made from durable plastic, it supports proper suction and efficient material movement during operation. Replacing a cracked or missing door helps restore airflow performance, improve vacuum efficiency, and maintain safe, controlled oper...

This is an authentic Craftsman part made to fit the blowers listed below. It is a flare style nozzle with an angled tip, allowing for concentrated directional airflow. This sturdy plastic part twist locks into place onto the lower tube. Sold individually.