Craftsman Lawn Tractor Control Cables

This is an authentic OEM part. The MTD deck engage cable is composed of metal and plastic parts, and has been designed for use in several tractor machines. This part is fastened onto the frame assembly. The deck engage cable works to move belt idler pulley and engage the cutting blades. Please refer to manual for specific repair instructions. A wrench and a screwdriver is helpful in making the rep...

This Genuine OEM blade control cable assembly is designed for use with walk-behind and push lawn mowers. Sold individually, it includes a durable metal wire cable with Z-type bent ends, a rubberized protective cover, and a plastic mounting clip. This essential component connects the control handle to the engine brake system, stopping the blade when the handle is released to ensure safe operation. ...

This is a genuine replacement part sourced from the original manufacturer for use with riding mowers and lawn tractors made by Husqvarna, Weedeater, Jonsered and Poulan. This part attaches the lever to the idler arm on the mower deck and grants you access to disengage and engage the blades. This manual clutch cable includes the cable, cable sheath with connection clips and the spring hook. You wil...

This cable is an original part from Craftsman for lawn tractors. This part pivots and pulls the belt idler pulley to fasten the belt and spins the cutting blades. It is recommended that you wear gloves before installing this part. You will need a pliers and a screw driver to replace this part. This cable is made of made of rubber, metal, and wire components.

Authentic replacement part used on Husqvarna riding lawn mowers/tractors. This cable consists of a metal wire cable with z-type bent end and rubberized cover/body. The clutch cable engages the deck. You may need pliers to complete this repair. • First you want to see where the old cable is attached • Just remove the cable end there and install the new one • Now you can run the new cable up...

This clutch cable connects the engagement lever to the mower deck, allowing you to activate the blades when needed. Built with a durable steel inner wire and protective outer casing, it provides reliable operation and consistent tension. Replacing a worn or damaged cable can restore proper blade engagement and ensure smooth, dependable performance.

This is an authentic manufacturer sourced replacement part used on lawn mowers/tractors. It connects the mower engagement lever to the idler arm on the mower deck and allows you to engage and disengage the blades. Includes bold and the zip tie. You may need Pliers to complete this repair. • Remove the cable end from the control head and install the new one • Now you can run the new cable dow...

This throttle and choke control cable allows you to adjust engine speed and engage the choke from the control panel, helping ensure smooth starting and reliable operation. Built for consistent performance, it provides precise control over engine functions during use. Replacing a worn or damaged cable can restore proper throttle response and help prevent issues such as an unresponsive lever or diff...

This is an original part from Husqvarna and Poulan for use with Lawn Tractors. The clutch assembly pushes and pulls the clutch cable to engage and disengage the mower blades. The most common reason for replacing the clutch lever is when pressing the lever does not cause the blades to begin rotating. This part is sold individually. The tools that you will need to replace the clutch assembly is a 3/...

It is an authentic OEM sourced replacement part which is specially produced for use with Weed Eater and Poulan walk-behind lawn mowers. It is the cable that stops the blade when the control handle is released if the cable is broken it will cause the brake to not release even when the lever is pressed. It is a high-quality rubber insulated component which is sold individually.

This part is an OEM from Husqvarna, Poulan and Weed Eater for use with Lawn Tractors. The Interlock switch disables the ignition system if it detects the lawn tractor is started or running in unsafe operating conditions. The most common reasons for replacing the clutch interlock switch are when the mower won't start or starts when the brake is not depressed. This part is sold individually. The too...

This positive battery cable is a durable electrical component designed to connect the battery to the equipment’s electrical system, ensuring efficient power transfer for reliable starting and operation. Constructed with heavy-gauge wiring and protective insulation, it is built to handle high current flow while resisting vibration, weather exposure, and wear. Its compact design allows for secure co...

The lift cable connects to the lift shaft assembly and goes around the roller pulley. This part is an OEM from MTD, Yard Machines, Bolens, Yard Man, Troy-Bilt, and Cub Cadet for use in lawn tractors. Keep in mind this high-quality part is priced individually. A screwdriver, a set of pliers, a socket set, and a wrench set might be needed during the installation process. This item is made out of met...

This is a genuine Husqvarna, Poulan, Weed Eater, and Jonsered replacement part used in compatible lawn tractors, lawn mowers, and tractors. The clutch cable attaches to the clutch cable head assembly and is made of metal and plastic. You may need an allen wrench and a set of pliers when replacing this part. It may become broken or stretched and will need to be replaced. This part is available as a...

This is a genuine manufacturer-sourced part which is designed for use with Murray and Snapper lawn mowers. The clutch cable engages the blades. It is an identical replacement for a faulty or a missing cable that was installed on a new unit. Please make sure to check the appropriate diagrams for your model for the correct repair procedure of this part. Keep in mind this high-quality rubber insulate...

This handle clutch cable is a direct replacement part designed for use with lawn mowers and other garden equipment. Commonly positioned on the left side, it connects the clutch handle to the transmission system, allowing smooth engagement and control while operating your machine. Built from durable materials with a flexible cable housing, it is engineered to withstand regular use and outdoor conditions.

This is a genuine manufacturer-sourced component is specially designed for use with Weed Eater, Husqvarna, and Poulan lawn mowers. It allows a user to engage and disengage the drive function of the unit. The assembly provides an identical replacement for a missing or a faulty drive control cable that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model f...

This is an original part from MTD for use with Lawn Tractors. The blade engagement cable pulls and pivots the belt idler pulley to tighten the belt and spin the cutting blades. The most common reason for replacing the cable is if it is damaged, causing the mower blades to not engage. This part is sold individually. The tools that you will need to replace the blade engagement cable is a 3/8" socket...