Echo Hedge Trimmer Hoses and Tubes

The purpose of the 13201056330 Fuel Return Tube is to return the excess fuel back into the fuel tank, after the primer bulb has been pressed and has primed the carburetor to start. After time the Fuel Return Line will become brittle and crack and will need to be replaced.

The V471001190 Fuel Pipe is connected to the fuel filter inside the fuel tank. It is inserted through the fuel line grommet and then connected to the carburetor so that when the primmer is pushed, it will force fuel into the carburetor. Fuel lines will at some time become brittle and crack and will have to be replaced.

OEM replacement part, this item is sold individually. This tube is connected to the fuel line grommet. Depending on the model you have it is either on the outside of the fuel tank or the inside of the fuel tank It is attached to the fuel filter inside the tank. When the primer bulb is pressed, fuel will be forced through this line into the carburetor. It is used on the model numbers shown below.

This part is the fuel return tube for your outdoor power equipment. It is made of yellow plastic and measures 3x6x110mm. The return tube transports excess fuel back into the fuel tank after the primer bulb has been pressed and has primed the carburetor so the engine can start. Over time, this fuel tube can crack or clog, and this can cause problems for the engine. To replace this part, carefully p...

This is a genuine OEM sourced part from the Echo manufacturer. The fuel tube (3x5x195mm) is composed of flexible plastic, and is compatible with many trimmer tools. The tube is fitted into the fuel grommet of the fuel tank assembly. This part is sold individually. A screwdriver is needed in the making the repair.

This is a genuine OEM replacement part, this item is sold individually. The Corrugated Fuel Tube is situated inside the fuel tank. The fuel filter is connect to it. It also connected to the fuel line by means of the fuel grommet on the fuel tank. It part of the delivery system that supplies fuel into the carburetor.

This is a genuine Echo replacement part used in compatible pruners. The orange main pipe attaches to the lower driveshaft assembly. When replacing this part a screwdriver and a wrench set may be needed. It is made of a durable material and will require replacing if it breaks. This item is available as an individual replacement part.

This is an authentic OEM part. The poly, Echo pipe-return-3x6x85mm is compatible with many various lawn and garden tools. This part is often fitted onto the grommet on the fuel tank. It is recommended to refer to specific manuals and diagrams for repair instructions. This part is sold individually. A screwdriver is helpful in the repair.

This genuine OEM component is specially designed for Echo and Shindaiwa lawn and garden equipment. It is an identical replacement for a missing or a damaged part that connects the fuel tube. Make sure to refer to the appropriate diagrams for your specific model for the exact location and the correct application of this item. Keep in mind this high-quality product is made of durable plastic and is ...

Genuine OEM replacement part, this item is sold individually. The Tube Connector is attached to the in tank fuel line which has the fuel filter connected to it. It is then pressed through the Fuel Line Grommet and the Fuel line is connected to it.

This is a genuine OEM sourced part which is designed for use with Echo handheld lawn and garden equipment. When you press the primer bulb, it will purge all the air out of the carburetor and fill its chambers with fuel. The excess fuel is then forced back into the tank through the return line. Over time these lines will become brittle and may crack, and will have to be replaced. This high-quality ...

This authentic fuel pipe is a genuine replacement part manufactured for use with Echo outdoor power equipment. It is commonly used in conjunction with the fuel tank vent to allow air into the tank, enabling proper fuel flow to the engine. Over time, fuel pipes can crack or break—especially when the equipment is tilted—leading to potential fuel leaks. This replacement pipe is sold individually. Ple...

This genuine OEM component is specially designed for Echo and Shindaiwa lawn and garden equipment. It is an identical replacement for a missing or a damaged part that connects the fuel tube. Make sure to refer to the appropriate diagrams for your specific model for the exact location and the correct application of this item. Keep in mind this high-quality product is made of durable plastic and is ...

This Genuine OEM fuel line is designed for use with a variety of Echo gas-powered trimmers and hedge clippers. Made from durable plastic and sold individually, this essential component delivers fuel from the tank to the carburetor, enabling proper engine function. When the primer bulb is pressed, it fills the carburetor with fuel; once full, any excess fuel is returned to the tank via the fuel ret...

This item has been sourced from the original manufacturer and is intended to be used with trimmers, blowers, and edgers from Echo. The plastic fuel pipe fits into the fuel tank grommet and is used to allow fuel to return to the tank from the carburetor. The fuel pipe is sold as an individual replacement part.

This authentic item is supplied directly from the original equipment manufacturer for use with Echo and Shindaiwa equipment. It is an identical replacement for a missing or a faulty pipe join that was installed on a new unit. The joint helps to connect two pipes together. Please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Kee...

Designed to serve as the main shaft of outdoor power equipment, this orange main pipe forms the structural backbone that connects and supports key components during operation. It provides rigidity and balance while housing internal drive elements, helping maintain proper alignment and smooth power transmission. Built to meet original equipment standards, this pipe is ideal for replacing a bent, cr...

The fuel tube is made out of rubber. This item is an OEM from Echo and Shindaiwa for use in blowers, trimmers, and vacuums. This is available as an individual replacement part. A set of pliers might be needed during the installation process. It will need to be replaced if it leaks or breaks.