Chipper Shredder Hardware
Popular Chipper Shredder Hardware Parts
- Manufacturer Part Number:
- 13211546730
This is a genuine ECHO/Shindaiwa replacement part It is compatible with over 150 machines listed below. The Fuel Line Grommet is placed into the fuel tank. The Vent tube, Fuel return line and fuel line are inserted through the three holes. A worn Fuel Line Grommet will cause fuel to leak from the tank. When replacing the Grommet it is advisable to replace the fuel lines at the the same time.
- Manufacturer Part Number:
- 710-0451
Genuine Manufacturer Approved Carriage Bolt is a standard part that fits a variety of products. This part is sold individually and the Nut is not included. The square area under the head is designed to fit into a square hole in the work piece it measures 5/16-18 x .75. It is this square hole that restrains the bolt and keeps it from turning when the nut is tightened.
- Manufacturer Part Number:
- 712-04065
- Manufacturer Part Number:
- 712-04063
This is a genuine manufacturer-sourced replacement hardware that is commonly utilized on Craftsman lawn and garden equipment. A lock nut is a type of nut that resists loosening when it is properly threaded onto a bolt. This is a standard hardware which has multiple applications depending on your unit, make sure to check appropriate diagrams for correct location and use of this item. Please note th...
- Manufacturer Part Number:
- 710-0599
This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure...
- Manufacturer Part Number:
- 712-04064
This is a genuine manufacturer sourced replacement part designed for use with a variety of lawn and garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This is a standard hardware which will have multiple applications based on your equipment. This lock nut is made out of metal and it is sold individually.
- Manufacturer Part Number:
- 21041752730
Genuine OEM replacement part,this item is sold individually. The purpose of the Wing Bolt is to secure the Air Filter Cover and Air Filter to the Air Cleaner Case on all of the Outdoor Products shown below.
MTD Hex Washer Hd. Self-Tapping Scr. 5/16-18 x .75" Lg.
$6.16
In Stock
Minimum Quantity of 2 required
- Manufacturer Part Number:
- 710-1260A
- Manufacturer Part Number:
- 13201309820
This is a genuine OEM replacement part, it is sold individually. Made of metal. Its purpose is to secure the fuel line to the fuel filter. It is commonly used with outdoor lawn equipment, and is compatible with the model numbers shown below.
- Manufacturer Part Number:
- 771009
This is an OEM Snapper and Simplicity part directly sourced from the manufacturer for use in lawn tractors. The push nut connects to the roller and is made of metal. During the installation process, a screwdriver might be needed to replace this part. Over time this item may break and will need to be replaced. This item is available as an individual replacement part.