Echo Chipper Shredder Hardware

This is a genuine ECHO/Shindaiwa replacement part It is compatible with over 150 machines listed below. The Fuel Line Grommet is placed into the fuel tank. The Vent tube, Fuel return line and fuel line are inserted through the three holes. A worn Fuel Line Grommet will cause fuel to leak from the tank. When replacing the Grommet it is advisable to replace the fuel lines at the the same time.

Genuine OEM replacement part,this item is sold individually. The purpose of the Wing Bolt is to secure the Air Filter Cover and Air Filter to the Air Cleaner Case on all of the Outdoor Products shown below.

This is a genuine OEM replacement part, it is sold individually. This clip is used in various areas of the over 150 outdoor product models shown below. It is most commonly used to clamp hoses or tubes in place.

This is a genuine OEM replacement part, it is sold individually. Made of metal. Its purpose is to secure the fuel line to the fuel filter. It is commonly used with outdoor lawn equipment, and is compatible with the model numbers shown below.

This manufacturer sourced replacement part designed for use with a variety of handheld lawn and garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This is a standard hardware which will have multiple applications based on your equipment. This lock nut is made out of metal and it is sold individually.

It is an authentic OEM sourced item that is specially produced for use with Shindaiwa and Echo handheld lawn and garden equipment. This screw is generally used to secure the housing, please make sure to check appropriate diagrams for correct location and use of this hardware. One torx screw is included per order.

This is a genuine OEM sourced replacement part designed for use with Echo blowers/trimmers. This is a standard hardware which has multiple applications based on your unit. Please refer to diagrams for proper application. This screw is made out of metal and it is sold individually. To remove or install this screw you would need a screwdriver.

This washer is available as an individual replacement part. It is used in various lawn and garden tools made by Echo and Shindaiwa. The washer attaches to the cylinder cover with a screw. It is made out of metal and is very small, so it will need to be replaced if it becomes lost or broken. An allen wrench will be needed when replacing this washer which is an authentic OEM part.

This Genuine OEM screw is a standard replacement part used on a variety of gas-powered trimmers and brushcutters. Constructed from durable metal and sold individually, this screw is typically used to secure the starter cover to the unit, ensuring a tight and stable fit during operation. The screw features a 4x16 thread size and requires a hex key or Allen wrench for proper tightening or removal...

This authentic manufacturer-supplied component is made for use with Echo and Shindaiwa handheld lawn and garden equipment. It is a standard hardware which may have multiple applications. Please make sure to check the owners manual and the appropriate diagrams of your model for the exact location and application of this part. Keep in mind this high-quality screw is made of durable metal and is sold individually.