Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Very impressed!
Fast ship, switch works perfectly. Glad I found these folks and will use again!!
Guest - January 13, 2021
Verified Purchase
★★★★★
★★★★★
EREPLACEMENTPARTS.COM EXCEEDED MY EXPECTATIONS
A friend recommended I contact E Replacement Parts when I broke a switch on my VS1221 wood lathe. Finding the part I needed in your excellent parts diagrams was no problem. Checkout was an easy process. My parts were delivered as promised in excellent condition. Thank you for a great experience.
Guest - February 12, 2022
Verified Purchase
★★★★★
★★★★★
Just what I needed
Found the part I needed, and it was delivered quickly. Works great!
Guest - June 25, 2022
Verified Purchase
★★★★★
★★★★★
Easy repair. Pulled old one out, put in new one
Arrived in a timely manner. Will definitely go to this company in the future.
Guest - April 12, 2023
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
15 - 30 mins
(2 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Unplug power from machine.
Locate and remove 2 main switch box mounting screws located on tailstock end of lathe.
Loosen 4 6mm lathe bed mounting socket screws from legs. Remove mounting screws completely on tailstock end only. Lift up lathe bed on tailstock end just enough to allow main switch box to be removed.
Remo
... Read moreve 4 screws that hold the two halves of the main switch box together.
Carefully separate the two halves.
Pay attention to the 4 wires that are connected to the main switch. Mark each wire with a color or number so that you can reconnect each wire to the proper terminal on the new switch. Remove all 4 wires from the switch.
Squeeze the mounting clips on the back side of the main switch to remove it from the switch box cover.
Install new main switch into box cover with OFF pointing to bottom. Reconnect all four wires to terminals on new switch. Reassemble main switch box halves.
Reinstall main switch box to underside of the tailstock end of the lathe bed. Re-secure lathe to legs or base.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19160531
Manufacturer Part Number: JT9-JWL1221VS-308
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
