Tools 5mm & 6mm allen wrench, 12mm end wrench, Small pry bar. Remove the 4 allen screws on top of the carriage. Remove the 2 allen screws at the end of the bed that hold the 3 shafts that drive the carriage. Use the pry bar to move the top carriage away from the gear box. Tip the gear box away from the bed. Use the 12mm end wrench to remo
... Read moreve the bolt holding the gear on. After removing the bolt use the pry bar to remove the gear. Beware!! Put a cloth over the worm gear opening below the brass gear or the key for the brass gear can fall in that opening. Not fun getting back out! Put the new gear in with the flange on the gear towards the gear box. When bolting the top carriage back on check to make sure the cross slide works. It could lock up when bolted together because the gears didn\'t mesh properly. Good luck.
Pulled out the pinion shaft that drives the worm gear.
I took off the carriage.
Unbolted the gear.
Put on the new gear.
Put back the carriage, then the pinion shaft. Done!
Did you find this story helpful?
Thank you for voting!
Gear fell off into another geer and was destroyed.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_10.gif "Part Location Diagram of JT9-6429 Jet GEAR")
_WW_10.gif "Part Location Diagram of JT9-6429 Jet GEAR")
