Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
it works!
I had a problem with my Delta Midi lathe, and your parts came I installed it with no problem at all. Then tested the lathe by turning an egg at different speeds and it worked fine, and the egg looks like a real egg.
Thanks
Guest - August 4, 2020
Verified Purchase
★★★★★
★★★★★
Prompt Delivery
The ordering process was easy and I received the item sooner than expected. That being said, the part I received failed after 10 minutes of run time. I am awaiting a response from customer service.
Douglas - October 4, 2022
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
1- 2 hours
(1 rated repair)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Speed Controller went out on the lathe. When I turned on the lathe, it would go at one speed (High), would also not turn on if I tried to have it go the other direction.
1. Removed the cover (4 Screws)
2. Took pictures of the inside to remember when each wire went.
3. Unplugged the wires
4. Removed (4) screws on the Speed Controller Bd.
5. Removed the board
6. Replaced with new Speed Controller Bd.
7. Fastened down with the (4) screws, made sure each one still had a sp
... Read moreacer.
8. Tried to wire up from the pictures, but that wasn\'t working so well, so I had another lathe of the same model. I opened that one up and mimicked the wiring.
9. Put the cover back on.
10. Turned on the lathe and it worked.
11.Tried to put the the speed dial on the potentiometer shaft, and broke the potentiometer. It was too tight.
12. Used the potentiometer assembly from the original unit. Left the speed dial off.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10326081
Manufacturer Part Number: 5140059-15
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 5140059-15 Delta Speed Controller")
_WW_1.gif "Part Location Diagram of 5140059-15 Delta Speed Controller")
