Already had pulled out old switch and took pictures with my IPhone for wires. Got new switch and brushes and popped them right in and works like new again!
Made sure the jigsaw was not plugged in. Took the screws out of the handle , disconnected the wires to the old switch , then installed the new switch . Then put the handle back on. Works like a charm.
1. Loosen housing screws and remove the housing half
2. Note the wire positions or take a picture
3. Unplug cable from speed controller
4. Remove four power wires from old switch
5. Insert power wires in new switch
6. Plug cable into speed controller
7. Check that the wires are in the correct places and
... Read more won\'t be pinched
8. Replace housing half and tighten screws
Remove the screws from the housing.
Remove the wires from the old trigger and reinstall the wires in the same location on the new trigger at the same time so you put them in the correct slots. Two of the wire are a little difficult to remove, I put a very small screw driver in the slots to loosen the connectors up as I pulled on the
... Read morem.
Put new trigger in old trigger location and reinstall housing.
Good to go!
Removed screws and one half of the housing.
Made a wiring diagram.
Loosened the cord clamp.
Remove the cord wires.
Then the other wires just like on the wiring diagram.
Tightened up the cord clamp.
Screwed the housings together.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 2607200670 Bosch Tool SWITCH")
_WW_1.gif "Part Location Diagram of 2607200670 Bosch Tool SWITCH")
