Part Location Diagram of 18-01-3025 Milwaukee Service Field
See part 4 in the diagram
Replacing your Milwaukee Impact Driver Service Field
( Grid squares measure 1x1 inch )

Service Field 18-01-3025

Manufactured by:
Milwaukee
ERP Number:
ERP10121708
Part Number:
18-01-3025
Original Equipment Manufacturer ?
  Works with your model  2663-059!
$64.02
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

30 - 60 mins 

(2 rated repairs) ?
  Works with your model   2663-059!

Product Description

?

This is a genuine manufacturer-sourced replacement field which is specially designed for Milwaukee power tools. A field is a central component of an electric motor which drives the tool, in conjunction with an armature it rotates the main shaft. Usually, a field is damaged by overloading the power tool, or because of a bad armature. It is highly recommended to replace both carbon brushes when replacing a field. Please note, this high-quality component is sold individually. A screwdriver and a wrench might be needed to perform this repair.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Milwaukee
This part works with the following products:
  • Impact Driver
  • Wrench
  • Cordless Drill
  • Angle Grinder

Videos For installing this part.

?
Replacing your Service Field

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Worn out Chuck,brushes and polling.

Roger from Miami, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
Stripped drill of it\'s entire casing and replaced electrical parts. Used bench vise to remove Chuck.
Did you find this story helpful?
Thank you for voting!

Brushes wore down and messed up the armature.

Mel from Edmond, Oklahoma

0 of 1 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
The project wan\'t really \'hard\' but the person needs basic mechanical skills and be patient.
The drill has to be almost completely dismantled to replace the carbon brush field and the difficult part of that was to disconnect(the soldering) the wires and resolder the new wires to the on-off switch.
Again, with basic ele ctrical and mechanical skills it can be done. The parts can be purchased for about a third the cost of a new drill. Reassemble requires patience
and not force it or the person will strip out the screw threads. Works like new and
getting ready to do another Milwaukee(the best) cordless drill.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10121708
Manufacturer Part Number: 18-01-3025
Brand Model Number Description
Milwaukee 0726-20 Hammer Drill - 28 Volt 1/2" Hammer-Drill
Milwaukee 0726-22 Hammer Drill - 28 Volt 1/2" Hammer Drill
Milwaukee 2610-20 Cordless Drill - 18 Volt Magnum 1/2" 34 Driver-Drill
Milwaukee 2610-24 Cordless Drill - 18 Volt Magnum 1/2&#34 Driver-Drill
Milwaukee 2611-20 Hammer Drill - (B54A) 18 Volt Magnum 1/2&#34 Hammer-Drill
Milwaukee 2611-24 Hammer Drill - 18 Volt Magnum 1/2&#34 Hammer-Drill
Milwaukee 2662-20 Impact Driver - Impact Wrench
Milwaukee 2662-22 Impact Driver - Cordless 18V 1/2" Square Impact Wrench
Milwaukee 2663-059 Impact Driver - Impact Driver
Milwaukee 2663-20 Impact Driver - Cordless 18V 1/2" Square Impact Wrench
Milwaukee 2663-22 Impact Driver - Cordless 18V 1/2" Square Impact Wrench
Milwaukee 2664-059 Impact Driver - Impact Driver
Milwaukee 2664-20 Impact Driver - Impact Wrench
Milwaukee 2664-22 Impact Driver - Cordless 18V 3/4" Square Impact Wrench
Milwaukee 2665-20 Impact Driver - Cordless 18V 7/16" Hex Impact Wrench
Milwaukee 2665-22 Impact Driver - Cordless 18V 7/16" Hex Impact Wrench
Milwaukee 2680-059 Angle Grinder - Angle Grinder
Milwaukee 2680-20 Angle Grinder - Cordless 18 Volt 4-1/2&#34 Cut-Off/Grinder
Milwaukee 2680-22 Angle Grinder - Cordless 18 Volt 4-1/2&#34 Cut-Off/Grinder