This genuine Dewalt replacement part is designed for use with Dewalt impact wrenches/drivers. This set contains the right and left side of the handle/housing. Please note the screws that hold the clamshell together are not included, they are sold separately. This clamshell set is made out of plastic and it is sold individually. Replacing this set you will need a screwdriver.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Fast and easy to deal with
Great parts
Guest - July 19, 2021
Verified Purchase
★★★★★
★★★★★
Dewalt impact driver
Broke the handle on my rattle gun. Fast easy replacement of the handle. 10 minute fix.
Guest - September 13, 2021
Verified Purchase
★★★★★
★★★★★
Easy replacement. Perfect fit, and quick repair.
Took only a few minutes to change this out. Just renewed a tool instead of spending $100 on a new impact drill. The impact drill is one of my most favorite tools. If I was stranded on an island with a way to recharge batteries, I would want an impact drill, screws, and and an axe. Thanks for the fast shipping and great option to fix tools!!!!!!!!
Guest - December 15, 2021
Verified Purchase
★★★★★
★★★★★
Worked as expected
Condition was good. I changed out the internals and am back to working again.
Guest - December 21, 2021
Verified Purchase
★★★★★
★★★★★
Great parts
Arrived quick
Guest - August 10, 2022
Verified Purchase
★★★★★
★★★★★
First time order
This was the first time placing an order on ereplacementparts.com. It was super easy to find the part I needed and placing the order and checking out went really smoothly. The part I ordered arrived on time and in great condition. I look forward to ordering from you again in the future. Scott B. in OKC,OK
Guest - August 22, 2022
Verified Purchase
★★★★★
★★★★★
Replacement shell
My tools are like new again. Just a few bucks and good as new. Thanks
Stan
Guest - October 24, 2022
Verified Purchase
★★★★★
★★★★★
Great! Worked out perfectly.
Great! Worked perfectly.
Guest - December 28, 2022
Verified Purchase
★★★★★
★★★★★
Helped me save money.
Fixing was better than buying new ones.
Guest - February 21, 2023
Verified Purchase
★★★★★
★★★★★
Exactly what was needed to fix my Dewalt Impact driver
Great part, outstanding prices, and top quality service. I called on a Sunday to place the order, spoke to a wonderfully helpful tech who explained how to make the repair, got the part within four days and got my impact driver running like new. Great company!
Guest - April 17, 2023
Verified Purchase
< Prev
1
2
Next >
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(27 rated repairs)?
< Prev
1
2
3
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
I dropped my power tool from a ladder and broke the clamshell.
1) Removed the torx screws from the old clamshell.
2) Removed the motor, trigger assembly and battery connector from the old clamshell.
3) Transferred everything to the new clamshell.
4) Reinstalled the torx screws.
5) Did my happy dance.
Split the case, replaced parts by disconnecting electrical space ends. Reconnected. Tested and motor was opposite of desired direction. Disassembled and swapped electrical connections. Way more power than before! Looks good too with new case!
Remove the screws from the housing. Remove the right side (screw side) of the housing, help separate the halves by inserting and twisting a flat blade screwdriver if the they won\'t separate. Place the new half on the tool and press into place. Flip the tool and remove the other side of the housing again with the help of a screwdriver
... Read more if needed. Tease the rear bearing out with your screwdriver as it may be tight on this side. Place the remaining side. Be certain the fork on the forward/reverse button did not slide out of the lever on the switch. Grip the handle, snap the sides completely together, replace the screws. Novice time, 15 minutes. Second time, three minutes.
According to another reviewer, I ordered the anvil assembly AND spring. Turns out all I needed was the spring. I decided to replace the clam shell as well. I do metal roofing and my driver has taken a beating over the last couple of years.
I recommend trying to replace the spring first before you do anything else.
... Read more/>
http://www.ereplacementparts.com/spring-p-956454.html
This is the spring located just under the sleeve that holds the ball bearing in place. On my driver the small section that secures the bearing had broken off from the spring.
Just follow this video and replace that spring.
https://www.youtube.com/watch?v=PQ8lSB_mP1c
Read less
Did you find this story helpful?
Thank you for voting!
Original drill clamshell was cracked in several places but otherwise was working
Remove all the screws, used a box cutter to cut sticker then opened clam shell on old impact driver, removed changing switch, then removed all electrical from old unit and held everything together as best as possible transferred to new clam shell and closed up using screws.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16526201
Manufacturer Part Number: N633132
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
