Part Location Diagram of D16-71 Little Wonder Gasket
See part A-40 in the diagram
( Grid squares measure 1x1 inch )

Gasket D16-71

Manufactured by:
Little Wonder
ERP Number:
ERP10044075
Part Number:
D16-71
Original Equipment Manufacturer ?
  Works with your model  D2000!
Special Order
Minimum Quantity of 2 required

A Bit Difficult 

More than 2 hours 

(3 rated repairs) ?
  Works with your model   D2000!

Product Description

?

This is a genuine manufacturer-sourced replacement gasket which is specially designed for use with Little Wonder hedge trimmers. The part provides an air-tight seal between connected parts, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. Over time the gasket may wear out and begin to crack eventually requiring a replacement, keep in mind this high-quality composite material item is sold individually.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Little Wonder
This part works with the following products:
  • Hedge Trimmer

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

More than 2 hours 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Gear teeth broke

Dwight from Quakertown, Pennsylvania

2 of 2 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
Parts Used:
D16-71, 310110
I had to completely disassemble the trimmer. I had no instructions and I had a few things happen that should not have. I was trying to remove the motor and the field mounting came off and one of the brushes got chipped. So I was able to remove the cluster gear and put in the new one. Then I could see why there were two gears sent along. I changed the smaller ear and tried to turn the assembly to make sure it would work. So I then attached the cutting blades and tried to turn the blades though their motion. It would not complete a cycle. I could not tell why. A friend came by and as both of us looked at it he noticed that the blades were hitting on each other.So I filed the flat sides of both blades, and reinstalled them. I also filed the brush face where it hits the commutator. I put the motor back together and all of the switches. I had trouble getting the cases back together. But I managed and I plugged it in and it worked! I was thrilled because it is the best hedge trimmer out there.
Did you find this story helpful?
Thank you for voting!

Tune up

tinh from mastic beach, New York

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
I don\'t know how to tell you, plus it would take all of the page. But after I used all of these parts in my, it\'s running like new. Thank you for providing parts
Did you find this story helpful?
Thank you for voting!

Trimmer link broke.

John from hastings on hudson, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set
Parts Used:
D16-71, 16-64
I took the broken link out and replaced it with the new one.

Amazing, considering this hedge trimmer is likely 20 years older than I am. Thanks!
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10044075
Manufacturer Part Number: D16-71
Brand Model Number Description
Little Wonder 1600SE Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 1602de Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 1602SE Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 1910 Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 1912 Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 1920 Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 1922 Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 2400DE Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 2400SE Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 2402DE Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 2402SE Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 2410 Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 2412 Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 2420 Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 2422 Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 3000SE Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 3002SE Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 3010 Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 3012 Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 3020 Hedge Trimmer - Electric Hedge Trimmer
Little Wonder 3022 Hedge Trimmer - Electric Hedge Trimmer
Little Wonder D1000 Hedge Trimmer - 16", 110 V Electric Hedge Trimmer
Little Wonder D2000 Hedge Trimmer - 110V Hedge Trimmer