I removed the back plate and two bolt and nuts from the blades retaining sliders. This gave me enough access to remove the old parts. Cleaned out the housing and installed new gears. Re-packed the housing with fresh grease, oiled the gear hole and felt pad. Installed the slider bolts and adjusted the tension. installed the back plate and
... Read more tested. Gears seemed to fit like a glove and meshed easily. However, I\'ve noticed it makes considerably more gear noise and seems to be straining a little. Hopefully the gears will loosen up after some break-in time.
Replacement parts had the best price.
I had to completely disassemble the trimmer. I had no instructions and I had a few things happen that should not have. I was trying to remove the motor and the field mounting came off and one of the brushes got chipped. So I was able to remove the cluster gear and put in the new one. Then I could see why there were two gears sent along. I
... Read more changed the smaller ear and tried to turn the assembly to make sure it would work. So I then attached the cutting blades and tried to turn the blades though their motion. It would not complete a cycle. I could not tell why. A friend came by and as both of us looked at it he noticed that the blades were hitting on each other.So I filed the flat sides of both blades, and reinstalled them. I also filed the brush face where it hits the commutator. I put the motor back together and all of the switches. I had trouble getting the cases back together. But I managed and I plugged it in and it worked! I was thrilled because it is the best hedge trimmer out there.
Read less
Did you find this story helpful?
Thank you for voting!
Gear teeth stripped when trimmer jammed trying to cut something too tough.
Took apart housing to see the problem. Ordered the gear assembly. Cleaned housing of sheared gear teeth. Replaced gears and added grease. Adjusted cutter tension according to instructions.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Transmission or Clutch","title":"Transmission or Clutch","url":"/parts/lawn-and-garden/hedge-trimmer/transmissions-and-clutches/"},{"position":2,"name":"310110","title":"310110","url":""}]
_WW_1.gif "Part Location Diagram of 310110 Little Wonder Cluster Gear Shaft")
_WW_1.gif "Part Location Diagram of 310110 Little Wonder Cluster Gear Shaft")
