Genuine Husqvarna replacement part, this item is sold individually. This hose is connected to the air purge bulb. The fuel from the is forced thru this tube and in to the carburetor>br> It can also be use as the return fuel line.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
On
Exactly what I needed !
Bob - July 22, 2019
Verified Purchase
★★★★★
★★★★★
Good uality parts
Received carb, fuel lines and primer. All parts were like original and not of cheap quality like many places.
Guest - April 6, 2020
Verified Purchase
★★★★★
★★★★★
Great web site!
The model of my pole saw is no longer available but found all the parts immediately on the site , received within days , I’m up and running again. Very rewarding experience! ereplacementparts rock!!!
Guest - June 12, 2020
Verified Purchase
★★★★★
★★★★★
Good parts, fast delivery
eReplacementParts had the parts I needed for my Husqvarna weed eater.
After the order made, I received an email notification that it might take 3 weeks to get parts due to Covid-19 issues.
They were able to get the parts to me in 7 days from order date.
They are now my go to for needed parts.
Brian - June 22, 2020
Verified Purchase
★★★★★
★★★★★
Great part
Fast shipping with the correct part
John - December 1, 2020
Verified Purchase
★★★★★
★★★★★
The part was easy to replace and was the correct part
The part was correct and it said it was in stock. When I ordered it it took almost 2 1/2 weeks to get the package. This isn't the first time this has happened to me with ordering things from here before. They don't even offer overnight or 2 day shipping
Guest - May 4, 2024
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1 removed outside plastic covers
2. Removed dirt and fuel from around the motor.
3 removed fuel tank
4 removed old fuel lines and grommets from gas tank
5 replaced fuel lines and grommets Be clean entire trimmer.
6 hooked fuel tank back up attached plastic covers.
7 filled fuel tank and checked for lea
... Read moreks and started trimmer. Everything works great just like new.
1. Removed engine cover.
2. Removed fuel tank
3. Replaced fuel line and return line
4. Put new fuel filter in tank
5. Replaced tank and cover
6. Installed new spark plug and air filter started right up
1. Took pictures before I took it apart.
2. Removed all the plastic.
3. Removed the tank.
4. Replaced the hoses and filter on the tank.
5. Replaced the fuel primer on the main unit.
6. Mounted the new hoses to the new carburetor.
7. Removed the old carburetor.
8. Installed the new carburetor and g
... Read moreasket to the trimmer.
9. Reinstalled the tank and all the plastic.
10. Started the trimmer and made adjustments to the carburetor.
11. Installed the carburetor stops to the Jets.
Read less
Did you find this story helpful?
Thank you for voting!
hose/tank grommets leaked when trimmer tilted during operation
Removed covers including recoil starter assy.
Removed fuel tank, disconnecting fuel lines.
drained/emptied fuel tank.
Removed priming bulb and fuel lines.
Removed fuel lines and grommets from fuel tank.
Installed new grommets in tank.
installed new lines in tank.
installed new lines to priming bul
... Read moreb.
installed priming bulb and lines.
connected lines to carb.
reinstalled tank.
reinstalled covers and recoil starter assy.
checked all connections and retightened all screws.
fueled the unit.
Started unit checking for leaks, none found.
trimmer ops ck satis.
Read less
Did you find this story helpful?
Thank you for voting!
fuel lines and air purge old and brittle (\'09) Husqvarna 223L Trimmer
Removed starter assy housing ( 3allen screws ) just for easier accessability , removed top cover ( 1 allen screw ) - took picture of three fuel lines (routing) - simply removed and replaced all above items mentioned . RUNS GREAT ! Cheaper than buying a new trimmer !
Did you find this story helpful?
Thank you for voting!
Fuel line had hardened and split. Could not prime carburetor.
1. Dismantled outer cover and pull rope assembly to allow fuel tank to come loose.
2. Had ordered all fuel lines, fuel filter, primer bubble, and air filter from eReplacementParts, not just the one fuel line that had split.
3. Was a wise choice because another fuel line split during disassembly.
4. Model 322L trimmer fue
... Read morel filter must first be pulled from fuel tank and cut off before fuel line can be removed. Be careful not to disrupt the rubber bushings in the fuel tank the fuel lines pass through. I had not ordered those. The bushings seal the fuel lines to prevent leaks. Mine didn\'t leak, but I had known, it would have been a good idea to have ordered the tank bushings as a good measure and reassurance you get no leaks.
5. When replacing all fuel lines remember to make a sketch where each fuel line connects. This is important. I should have listed this first. Two lines go to the carburetor and to go to the primer bubble. Don\'t trust your memory. Make the sketch.
6. The longer fuel line must be pushed into the tank and brought out the fuel cap opening first before you install the filter. Push the fuel filter and rest of fuel line back into the tank. Some fuel line may have to be trimmed.
7. I replaced the other fuel lines trimming off excess, making sure there were no kinks or pinched segments.
8. I reassembled the fuel tank making sure the tank tabs fit snugly into their respective slots on the trimmer body as well as the pull rope assembly. All the while making sure the fuel lines remained routed properly.
9. Finally I verified none of the fuel lines had come undone and reassembled the outer housing. The carburetor air filter was shipped pre oiled and was easily installed.
10. I installed a new spark plug that I had purchased locally.
Pay attention to the assembly before servicing. Clean your trimmer while it\'s apart with rags and WD40 or some other oil solvent cleaner.
I started the trimmer and it ran great. No leaks from fuel system. Ready to go.
1. Removed all the plastic housings
2. Removed the gas tank
3. Removed old hose pieces and replaced with new ones
4. Popped the fuel primer back in
5. Replaced gas tank and plastic housings
6. Even found a few pieces that had broken years ago like bottom metal plate
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/lawn-and-garden/hedge-trimmer/hoses-and-tubes/"},{"position":2,"name":"537042401","title":"537042401","url":""}]
