This high quality gasket is a genuine manufacturer sourced replacement part that is specially designed for Husqvarna gas powered handheld lawn and garden equipement. This gasket is generally used to provide an air tight seal between the carburetor and the insulator. Over time gaskets tend to get compressed and deteriorate eventually requiring replacement. One compound material gasket is included per order.
1. Took pictures before I took it apart.
2. Removed all the plastic.
3. Removed the tank.
4. Replaced the hoses and filter on the tank.
5. Replaced the fuel primer on the main unit.
6. Mounted the new hoses to the new carburetor.
7. Removed the old carburetor.
8. Installed the new carburetor and g
... Read moreasket to the trimmer.
9. Reinstalled the tank and all the plastic.
10. Started the trimmer and made adjustments to the carburetor.
11. Installed the carburetor stops to the Jets.
Read less
Did you find this story helpful?
Thank you for voting!
carburtetor was not pumping or metering fuel properly
Removed external housing, then removed carburetor. Cleaned gasket surfaces, and installed new parts. Started engine and set carburetor low speed idle screw and set high speed screw for proper fuel mixture settings.
removed all the plastic from engine, removed the cylinder, cleaned trimmer, replaced gaskets in carb, replaced fuel line and filter, reassembled, new gas started trimmer. runs great.
1. Remove the cover.
2. Remove the throttle cable.
3. Remove two mounting screws.
4. Remove the carburetor.
5. Replace the gasket with the new one.
6. Install the new carburetor.
7. Replace the throttle cable.
8. Assemble all covers.
9. Adjust the mixture for proper running.
1. Removed cover with T25 torx bit
2. Removed air filter
3. Disconnected the throttle cable and fuel lines
4. Removed carburetor and gaskets
5. Checked air settings on old carburetor
6. Set air on new carburetor
7. Installed new gaskets and carburetor
8. Reinstalled throttle cable and fuel lines
... Read more 9. Reinstalled air filter
10. Reinstalled cover
11. Started the Trimmer
12. Trimmed
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/parts/lawn-and-garden/hedge-trimmer/seals-and-gaskets/"},{"position":2,"name":"503497101","title":"503497101","url":""}]
_WW_5.gif "Part Location Diagram of 503497101 Husqvarna Gasket")
_WW_5.gif "Part Location Diagram of 503497101 Husqvarna Gasket")
