Heat Hog Heater Parts

Heat Hog Appliance Parts

We sell only genuine OEM Heat Hog ® parts.

Top Heat Hog Heater Models

See All Models

Popular Heat Hog Heater Parts

Manufacturer Part Number:
70-054-0100
This is a Genuine OEM replacement parts used on certain Kerosene/Diesel Forced Air Heaters. This kit includes an air inlet filter, an outlet filter and a lint filter. Its purpose is to filter out dust and debris from contaminating and damaging the motor assembly.
Manufacturer Part Number:
70-027-0300
This item is available as an individual replacement part. The main PCB assembly connects to the thermostat control knob and the fuse. This genuine item is supplied by the original equipment manufacturer for use with heaters made by Pro Temp, Heat Stream, Heat Hog, and Master. When replacing this part a screwdriver might be required during the installation process. It will need to be replaced if it breaks.
Manufacturer Part Number:
70-052-0200
This genuine OEM spark plug kit is a replacement kit for use in outdoor power equipment. It consists of the spark plug, mounting bolt, washer, and gasket. Over time, spark plugs can become fouled with carbon deposits, leading to misfires, reduced fuel efficiency, and poor engine performance. This all-in-one kit allows you to replace the old, worn-out spark plug with a new one, ensuring the engine ...
Fuel Filter Assembly
$14.17
On Order
Manufacturer Part Number:
70-003-0100
This item is a genuine OEM sourced replacement part that is intended to be used with forced air heaters from Pro Temp, Heat-Stream, Heat Hog, and Master. The plastic fuel filter connects to the fuel line and is used to prevent contaminants from entering the motor assembly. This item is available as an individual replacement part.
Manufacturer Part Number:
70-037-0350
This ignitor in a heater, also referred to as a spark ignitor, is a genuine OEM replacement part designed for heaters. It is responsible for the ignition of the fuel-air mixture. If you are having difficulties starting the heater, noting low power output, or experiencing misfires, the ignitor will need to be replaced if the spark plug is functional. The ignitor can fail due to wear and tear over ...
Manufacturer Part Number:
70-035-0300
This is an authentic component which is sourced directly from the original equipment manufacturer for use with kerosene forced air heaters. The line is utilized to carry the air between the combustion chamber and the fan assembly. Unfortunately, over time the material will wear out and may begin to crack eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of y...
Manufacturer Part Number:
70-036-1010
This is a genuine OEM replacement part designed for use with Pro Temp, Heat Stream and Master kerosene forced air heaters. The line is utilized to deliver the fuel from the tank into the carburetor. When you press the primer bulb, it will purge all the air out of the carburetor and fill its chambers with fuel. The excess fuel is then forced back into the tank through the return line. Unfortunately...
Manufacturer Part Number:
70-055-0100
Manufacturer Part Number:
70-019-0100
It is a genuine item that is supplied by the original equipment manufacturer. This part is made for use with kerosene forced air heaters. The thermostat acts as a sensor which protects the unit from overheating. Unfortunately, over time it may wear out, get damaged or stop working all together eventually requiring a replacement. Note, this high-quality thermostat limit control is sold individually...
Air Pressure Gauge
$20.61
In Stock
Manufacturer Part Number:
70-025-0100
This is an authentic OEM sourced replacement gauge which is specially designed for use with kerosene heaters. The gauge registers pressure readings, over time it may wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality item is made of durable materials and is sold individually. Please make sure to refer to the appropriate diagrams of your specific model for...
Manufacturer Part Number:
70-002-0105
This is a genuine OEM sourced part which is specially designed for use with kerosene forced air heaters. It is an identical replacement for a missing or faulty drain valve that was installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable plastic and is sold individually.
Manufacturer Part Number:
70-016-1000
This is a photocell designed for use in space heaters to detect the presence of a flame, ensuring that the burner ignites and remains lit to provide heat while preventing the release of unburned gas. This photocell is a genuine OEM part, sold individually, and is compatible with various heater models. It is typically attached to the main combustion chamber with a bracket (sold separately). Factors...

Heat Hog Heater Models