Part Location Diagram of 323711-41 DeWALT O Ring
See part 74 in the diagram
( Grid squares measure 1x1 inch )

O Ring 323711-41

Manufactured by:
DeWALT
ERP Number:
ERP10169058
Part Number:
323711-41
Original Equipment Manufacturer ?
  Works with your model  D25940KB2!
$5.95
Special Order
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   D25940KB2!

Product Description

?

This is an authentic replacement part manufactured for use with DeWalt demolition hammers. The special o-ring is commonly used to seal the space between the cylinder and housing. This o-ring is available as an individual replacement part, please see model diagram for associative parts.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • DeWALT
  • Black and Decker
This part works with the following products:
  • Hammer
  • Hammer Drill
Part# 323711-41 replaces these:
323711-41,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Breaker hammer started to twist, broken part inside.

Aaron from Palmdale, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench set
Disassembled breaker (NOT hammer drill) and found broken part. I\'ve had it for over 15 years so I ordered all new o-rings, springs, piston, and a few seals. Hope to get another 15 years of life from it!
1. Disassemble
2. Clean all parts
3. Remove and replace all O-rings and seals.
4. Replace piston
5. Re-gre ase everything using new sticky grease
6. Reassemble

Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10169058
Manufacturer Part Number: 323711-41
Brand Model Number Description
DeWALT D25899 Hammer Drill - SDS Max Demolition Hammer
DeWALT D25899K Hammer Drill - 21 lb SDS Max Demolition Hammer
DeWALT D25899K-AR Hammer - 10kg Demolition Hammer
DeWALT D25899K-B2 Hammer - 10kg Demolition Hammer
DeWALT D25900 Hammer Drill - SDS Demolition Hammer
DeWALT D25900K Hammer - Sds Max Demolition Hammer
DeWALT D25900KAR Hammer - Demolition Hammer
DeWALT D25900KB2 Hammer - Demolition Hammer
DeWALT D25901 Hammer Drill - Demolition Hammer
DeWALT D25901K Hammer - Demolition Hammer
DeWALT D25901K-AR Hammer - Demolition Hammer
DeWALT D25901K-B2 Hammer - Demolition Hammer
DeWALT D25901K-B3 Demolition Hammer - 10 Kilo Sds-Max Demolitio
DeWALT D25902K Hammer - Demolition Hammer
DeWALT D25940 Hammer Drill - Hex Demolition Hammer
DeWALT D25940K Hammer - Demolition Hammer
DeWALT D25940KAR Hammer - Demolition Hammer
Black and Decker D25940KB2 Hammer - Demolition Hammer
DeWALT D25941 Hammer Drill - Demolition Hammer
DeWALT D25941K Hammer Drill - 26 lb. 3/4" 19mm Hex Demolition
DeWALT D25941K-AR Hammer - Demolition Hammer
DeWALT D25941K-B2 Hammer - 12kg Demolition Hammer