- This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
- New stock is on the way! On order parts usually ship within 7 business days.
- Item is not in stock and usually ships 10-15 business days from the time you place your order.
- This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Brush Kit 584429-01
- Manufactured by:
- DeWALT
- ERP Number:
- ERP10180227
- Part Number:
- 584429-01
Product Description
?This is a genuine manufacturer-sourced component which is made for DeWALT rotary hammers. Carbon brushes are one of the most commonly replaced power tool components. They play a key role by conducting an electric current in a motor. Unfortunately, over time brushes will wear out and they may begin to fail eventually requiring replacements to ensure proper performance. Keep in mind this high-quality kit includes two durable carbon brushes with attached lead wires. A screwdriver will be needed to perform this repair.
Troubleshooting
- DeWALT
- Hammer Drill
- Hammer
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
Rotary hammer motor would not run.
Richard from Chappaqua, New York
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
- Parts Used:
- 584429-01
Pushed out steel pin holding handle to body.
Removed 4 torx screws holding motor cover and removed cover.
Blew dust out of unit.
Removed brush wire.
Removed 2 screws holding brush holder to case.
R&R brush. Repeat for other side.
Reassemble
Premature bad brush
Ernest from Merced, California
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
- Parts Used:
- 584429-01
2. Used a Torx driver to remove the brush holder.
3. Pulled off wire clips.
4. Swapped out the brushes.
5. Put back in reverse order and was done.
- < Prev
- 1
- Next >
Model Cross Reference
Manufacturer Part Number: 584429-01
| Brand | Model Number | Description |
|---|---|---|
| DeWALT | D25303 | Hammer Drill - SDS Rotary Hammer |
| DeWALT | D25303K | Hammer - 1 Sds Hammer |
| DeWALT | D25304 | Hammer Drill - SDS Rotary Hammer |
| DeWALT | D25304K | Hammer - 1 Sds Hammer |
| DeWALT | D25313 | Hammer Drill - Hammer Drill |
| DeWALT | D25313K | Hammer Drill - 1" L-Shape SDS Rotary Hammer |
| DeWALT | D25314 | Hammer Drill - SDS Hammer |
| DeWALT | D25314K | Hammer - 1 Sds Hammer |
| DeWALT | D25323 | Drill - Dewalt D25323-Type-2 Parts |
| DeWALT | D25323K | Hammer Drill - 1" L-Shape SDS Rotary Hammer |
| DeWALT | D25324 | Drill - Dewalt D25324-Type-2 Parts |
| DeWALT | D25324K | Hammer Drill - Rotary Hammer |
| DeWALT | D25330 | Hammer Drill - Chipping Hammer |
| DeWALT | D25330K | Hammer Drill - Compact SDS Chipping Hammer |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.